Dual Piezo Motor Driver IC
Technical coantmesntAsGtill valid
Data Sheet
NSD-1202
Dual Piezo Motor Driver IC for SQL Series
SQUIGGLE Motors
1 G...
Description
Technical coantmesntAsGtill valid
Data Sheet
NSD-1202
Dual Piezo Motor Driver IC for SQL Series
SQUIGGLE Motors
1 General Description
2 Key Features
The NSD-1202 is a dedicated piezo motor driver ASIC capable of driving two SQL Series SQUIGGLE motors from a single 2.8 to 5.5 VDC supply.
The two motors can be controlled independently using a standard I²C interface.
An on-chip DC-DC step-up converter generates the high supply voltage (24 to 40 VDC) required by the piezoelectric elements of the SQUIGGLE motor.
Four half bridge drivers create pairs of phase-shifted square waves with ultrasonic frequency as required to drive SQL Series SQUIGGLE motors.
Wide Input Supply Voltage Range: 2.8 to 5.5VDC
Step-up converter to generate programmable high-voltage power supply (24 to 40V)
Minimum 65% efficiency (at VDD=2.8V, IOUT=25mA, freq=2MHz)
4x output driver with defined rise/fall time
I²C interface
On chip registers store driver instructions
Power-down mode for minimal power consumption in stand-by
Small 4x4mm 16-Pin QFN Package
This part supersedes and is backward-compatible with the NSD1102.
3 Applications
Figure 1. NSD-1202 Functional Block Diagram
The NSD-1202 is ideal for SQUIGGLE piezoelectric motor driver.
VIN (2.8-5.5V)
L1
4.7µH C1 22µF
VDD (2.8-5.5V)
LX
VDDH (programmable 24V...40V)
D1 VDDH
C2 1µF
XPD
Voltage reference
Step-up controller
TRIM
VSS SDA SCL ADR
CLK
NSD-1202
I²C Interface
Registers
LOGIC
Levelshifter
Levelshifter
Levelshifter
Levelshif...
Similar Datasheet