Miniature Position Encoder
NSE-5310
Miniature Position Encoder with Zero Reference and I²C Output
1 General Description
The TRACKER NSE-5310 is an...
Description
NSE-5310
Miniature Position Encoder with Zero Reference and I²C Output
1 General Description
The TRACKER NSE-5310 is an incremental position sensor with onchip encoding for direct digital output. A Hall element array on the chip is used to derive the incremental position of an external magnetic strip placed above the IC at a distance of 0.3 mm (typ). This sensor array detects the ends of the magnetic strip to provide a zero reference point. The integration of Hall-effect position sensors, analog front end and digital signal processing on a single IC chip provides an ingeniously small position sensor, without the need for external pulse counters. Direct digital output is accessible over the serial interface using I²C protocol. The TRACKER NSE-5310 provides absolute position information over the length of a magnet pole pair (2 mm). A user can count pole pairs and achieve absolute position information over the entire length of the magnet (essentially unlimited). With better than 0.5 micron resolution, the TRACKER is a robust, cost-effective alternative to miniature optical encoders. It can be used as a linear or off-axis rotary encoder.
Figure 1. TRACKER NSE-5310 Block Diagram
2 Key Features
Direct digital output using I²C protocol
End-of-magnet detection for built-in zero reference
0.488 μm resolution
< 2 μm bi-directional repeatability
< ±10 µm absolute error
On-chip temperature sensor
Magnetic field strength monitor
Available in TSSOP-20
Custom packaging s...
Similar Datasheet