3D Low Frequency Wakeup Receiver
AS3932
3D Low Frequency Wakeup Receiver
General Description
The AS3932 is a 3-channel low power ASK receiver that is a...
Description
AS3932
3D Low Frequency Wakeup Receiver
General Description
The AS3932 is a 3-channel low power ASK receiver that is able to generate a wake-up upon detection of a data signal which uses a LF carrier frequency between 110 - 150 kHz. The integrated correlator can be used for detection of a programmable 16-bit wake-up pattern. The device can operate using one, two, or three active channels.
The AS3932 provides a digital RSSI value for each active channel, it supports a programmable data rate. The AS3932 offers a real-time clock (RTC), which is either derived from a crystal oscillator or the internal RC oscillator.
The programmable features of AS3932 enable to optimize its settings for achieving a longer distance while retaining a reliable wake-up generation. The sensitivity level of AS3932 can be adjusted in presence of a strong field or in noisy environments.
The device is available in 16-pin TSSOP and 16LD QFN (4×4) packages.
Ordering Information and Content Guide appear at end of datasheet.
Figure 1: Added Value of using AS3932
Key Benefits & Features
The benefits and features of AS3932, 3D Low Frequency Wakeup Receiver are listed below:
Benefits
Features
Enables low power active tags
3-channel ASK wake-up receiver
Selectable carrier frequency
Carrier frequency range 110 - 150 kHz
One, two, or three channel operation
1-D, 2-D, or 3-D wake-up pattern detection
Highly resistant to false wake-ups
16-bit programmable wake-up pattern
Improved immunity to false wake...
Similar Datasheet