DC/DC Converters. MDW1035 Datasheet

MDW1035 Converters. Datasheet pdf. Equivalent

MDW1035 Datasheet
Recommendation MDW1035 Datasheet
Part MDW1035
Description Single & Dual Output DC/DC Converters
Feature MDW1035; FEATURES Small DIP-16 Plastic Package 23.8 x 13.7 x 8.0 mm (0.94 x 0.54 x 0.31 inches) Wide 2:1 Inpu.
Manufacture MINMAX
Datasheet
Download MDW1035 Datasheet




MINMAX MDW1035
FEATURES
Small DIP-16 Plastic Package
23.8 x 13.7 x 8.0 mm (0.94 x 0.54 x 0.31 inches)
Wide 2:1 Input Range
Fully regulated Output
Operating Temp. Range –40°C to +80°C
Short Circuit Protection
I/O-isolation 1500 VDC
Input Filter meets EN55022,class A and FCC, level A
Cost optimized Design
CSA/UL/IEC/EN 60950-1 Safety Approval
3 Year Product Warranty
MDW1000 SERIES
DC/DC CONVERTER 2W, DIP-Package
PRODUCT OVERVIEW
The MINMAX MDW1 series is a range of isolated 2W DC/DC converter modules featuring fully regulated output voltages and wide 2:1 input voltage ranges.
The products come in a compact DIP-16 package with a low height of just 8.0 mm (0.31 inch). An excellent efficiency allows an operating temperature
range of –40°C to +80°C.
These DC/DC converters offer an economical solution for many cost critical applications in battery-powered equipment and instrumentation.
Model Selection Guide
Model
Number
Input
Voltage
(Range)
MDW1011
MDW1012
MDW1013
MDW1014
MDW1015
MDW1016
MDW1017
MDW1021
MDW1022
MDW1023
MDW1024
MDW1025
MDW1026
MDW1027
MDW1031
MDW1032
MDW1033
MDW1034
MDW1035
MDW1036
MDW1037
MDW1041
MDW1042
MDW1043
MDW1044
MDW1045
MDW1046
MDW1047
VDC
5
(4.5 ~ 9)
12
(9 ~ 18)
24
(18 ~ 36)
48
(36 ~ 75)
Output
Voltage
VDC
3.3
5
12
15
±5
±12
±15
3.3
5
12
15
±5
±12
±15
3.3
5
12
15
±5
±12
±15
3.3
5
12
15
±5
±12
±15
Output Current
Max. Min.
mA mA
500 125
400 100
167 42
134 33
±200 ±50
±83 ±21
±67 ±17
500 125
400 100
167 42
134 33
±200 ±50
±83 ±21
±67 ±17
500 125
400 100
167 42
134 33
±200 ±50
±83 ±21
±67 ±17
500 125
400 100
167 42
134 33
±200 ±50
±83 ±21
±67 ±17
Input Current
@Max. Load
mA(typ.)
471
548
534
582
667
615
598
184
217
209
220
242
224
226
96
109
109
108
119
112
110
49
57
53
55
62
57
57
@No Load
mA(typ.)
40
20
10
8
Reflected Max. capacitive
Ripple
Load
Current
mA(typ.)
F
2200
1000
170
100 110
470#
100#
47#
2200
1000
170
25 110
470#
100#
47#
2200
1000
170
15 110
470#
100#
47#
2200
1000
170
10 110
470#
100#
47#
# For each output
Efficiency
(typ.)
@Max. Load
%
70
73
75
73
64
69
71
73
77
80
80
73
78
78
72
77
80
81
74
78
80
71
73
79
79
71
77
77
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2013/05/16 REV:7 Page 1 of 4



MINMAX MDW1035
MDW1000 SERIES
DC/DC CONVERTER 2W, DIP-Package
Input Specifications
Parameter
Input Surge Voltage (1 sec. max.)
Start-Up Voltage
Under Voltage Shutdown
Reverse Polarity Input Current
Short Circuit Input Power
Internal Power Dissipation
Conducted EMI
Model
5V Input Models
12V Input Models
24V Input Models
48V Input Models
5V Input Models
12V Input Models
24V Input Models
48V Input Models
5V Input Models
12V Input Models
24V Input Models
48V Input Models
All Models
Min. Typ. Max. Unit
-0.7 ---
11
-0.7 ---
25
-0.7 ---
50
-0.7 --- 100
3.5 4 4.5
4.5 7
9 VDC
8 12 18
16 24 36
--- 3.5
4
--- 6.5 8.5
--- 11 17
--- 22 34
--- --- 1 A
--- --- 1500 mW
--- --- 1800 mW
Compliance to EN 55022,class A and FCC part 15,class A
Output Specifications
Parameter
Output Voltage Setting Accuracy
Output Voltage Balance
Line Regulation
Load Regulation
Ripple & Noise (20MHz)
Transient Recovery Time
Transient Response Deviation
Temperature Coefficient
Short Circuit Protection
Conditions
At 50% Load and Nominal Vin
Dual Output, Balanced Loads
Vin=Min. to Max.
Io=25% to 100%
25% Load Step Change
Min. Typ.
--- ---
--- ±1.0
--- ±0.3
--- ±0.5
--- 30
--- 100
--- ±3
--- ±0.01
Continuous
Max.
±2.0
±2.0
±0.5
±0.75
50
300
±5
±0.02
Unit
%Vom.
%
%
%
mV P-P
sec
%
%/
General Specifications
Parameter
I/O Isolation Voltage (rated)
I/O Isolation Resistance
I/O Isolation Capacitance
Switching Frequency
MTBF (calculated)
Safety Approvals
Conditions
Min. Typ. Max.
60 Seconds
1500 ---
---
500 VDC
1000 ---
---
100KHz, 1V
--- 250 420
--- 300 ---
MIL-HDBK-217F@25 , Ground Benign
1,000,000
---
---
UL/cUL 60950-1 recognition(CSA certificate), IEC/EN 60950-1(CB-scheme)
Unit
VDC
M
pF
KHz
Hours
Input Fuse
5V Input Models
1000mA Slow-Blow Type
12V Input Models
500mA Slow-Blow Type
24V Input Models
250mA Slow-Blow Type
48V Input Models
120mA Slow-Blow Type
Environmental Specifications
Parameter
Operating Ambient Temperature Range (See Power Derating Curve)
Case Temperature
Storage Temperature Range
Humidity (non condensing)
Cooling
Lead Temperature (1.5mm from case for 10Sec.)
Conditions
Natural Convection
Min.
-40
---
-55
---
Free-Air convection
---
Max.
+80
+90
+105
95
260
Unit
% rel. H
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2013/05/16 REV:7 Page 2 of 4



MINMAX MDW1035
Power Derating Curve
MDW1000 SERIES
DC/DC CONVERTER 2W, DIP-Package
Notes
1 Specifications typical at Ta=+25 , resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
3 Ripple & Noise measurement bandwidth is 0-20 MHz.
4 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these
5 All DC/DC converters should be externally fused at the front end for protection.
6 Other input and output voltage may be available, please contact factory.
7 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
8 Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
0.50 [0.02]
1
78
Pin Connections
Pin Single Output
1 -Vin
7 NC
8 NC
9 +Vout
10 -Vout
16 +Vin
Dual Output
-Vin
NC
Common
+Vout
-Vout
+Vin
NC: No Connection
Bottom View
16 10 9
3.0
[0.12]
15.24 [0.60]
23.8 [0.94]
2.54
[0.10]
All dimensions in mm (inches)
Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
Pin diameter 0.5 ±0.05 (0.02±0.002)
Physical Characteristics
Case Size
: 23.8x13.7x8.0 mm (0.94x0.54x0.31 inches)
Case Material
: Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Pin Material
: phosphor bronze
Weight
: 5.1g
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2013/05/16 REV:7 Page 3 of 4







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)