Document
RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 25 Amperes
MP2505 THRU
MP2510
FEATURES
* Superior thermal desing * 300 amperes surge rating
//
* 1/4 universal faston terminal * Hole thru for # 10 screw
MECHANICAL DATA
* UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O
MP-25
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
MP-25W
MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current at Tc = 55oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range
SYMBOL VRRM VRMS VDC IO
MP2505 MP251 MP252 MP254 MP256 MP258 MP2510 UNITS 50 100 200 400 600 800 1000 Volts 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts 25.0 Amps
IFSM
300 Amps
TJ,TSTG
-55 to + 175
0C
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS
Maximum Forward Voltage Drop per element at 12.5A DC
Maximum Reverse Current at Rated DC Blocking Voltage per element
@TA = 25oC @TC = 100oC
NOTE: Suffix ”W” for wire type
SYMBOL VF
IR
MP2505 MP251 MP252 MP254 MP256 MP258 MP2510 UNITS 1.1 Volts 10 uAmps 0.5 mAmps 2001-5
PEAK FORWARD SURGE CURRENT, (A)
RATING AND CHARACTERISTIC CURVES ( MP2505 THRU MP2510 )
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
500 400
8.3ms Single Half Sine-Wave (JEDEC Method)
300
200
100
0
12
4 6 8 10 20 40 6080100
NUMBER OF CYCLES AT 60Hz
FIG. 3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS 100
AVERAGE FORWARD CURRENT, (A)
FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE
25
20
15
10
Single Phase Half Wave
5 60Hz Indutive or
Resistive Load
0 0 50 100 150 175 CASE TEMPERATURE, ( ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
10
INSTANTANEOUS REVERSE CURRENT, (uA)
10
1.0
TJ = 25 Pulse Width = 300us
1% Duty Cycle
.1
1.0
TJ = 25
.1
.01 .6 .7 .8 .9 1.0 1.1 1.2 1.3
INSTANTANEOUS FORWARD VOLTAGE, (V)
1.142 (29) 1.102 (28) .673 (17.1) .634 (16.1)
Max. .311 (7.9) .480 (12.2) .425 (10.8)
Hole for # 10 screw Min f.200 (5.08)
.01 0 20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % )
.043 (1.1) .039 (1.0)
1.142 (29) 1.102 (28)
MAX. .311 (7.9) MIN. .787 (20.0)
Hole for # 10 screw Min .200 (5.08)
INSTANTANEOUS FORWARD CURRENT, (A)
.732 (18.6) .693 (17.6) .673 (17.1) .634 (16.1) 1.142 (29) 1.102 (28) .732 (18.6) .693 (17.6) .469 (11.9) .429 (10.9) .142 (29.0) .102 (28.0)
.583 (14.8) .543 (13.8)
MP-25
.32 x .252 (0.81 x 6.35)
.732 (18.6) .693 (17.6)
MP-25W
RECTRON
.