Document
XW2Z
Dimensions
Unit: mm (inch)
3 XW2Z-PPPA FOR 32-POINT PLC I/O MODULES (CONNECTOR TYPE)
The G79-PC Cable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC Cable can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet.
Wiring Diagram
FCN-367J024-AU/F (mated side)
Cable length L
XG4M-2030 (mated side)
XW2Z
Part number XW2Z-050A XW2Z-100A XW2Z-150A XW2Z-200A XW2Z-300A XW2Z-500A
Cable length L 0.5 m (1.64 ft) 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft)
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
C200H-ID215 C200H-OD215 C200H-MD215 C200H-MD115 C200H-MD501 C200H-ID501 C200H-OD501 C500-ID218CN C500-ID501CN C500-OD415CN C500-MD211CN C500-OD501CN
C200H-ID215 C200H-ID501 C500-ID218CN C500-ID501CN C200H-MD215 C200H-MD115 C200H-MD501 C500--MD211CN
I/O points
32 points input 32 points output 16 points in/16 points out 16 points in/16 points out 16 points in/16 points out 32 points input 32 points output 32 points input 32 points input 32 points output 16 points in/16 points out 32 points output
32 points input 32 points input 32 points input 32 points input 16 points in/16 points out 16 points in/16 points out 16 points in/16 points out 16 points in/16 points out
Terminal block XW2B-20G5 XW2B-20G4 XW2B-40G5-T XW2B-20G5-D
XW2C-20G5-IN16 (See Note 3)
Dedicated cable XW2Z-PPPA
Note: 1. 2. 3.
The G79-P Cable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC Cable can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet.
The Input or Output Modules above have two connectors, so each one can use up to two Terminal Blocks and two dedicated cables.
The XW2C is a dedicated Input Terminal Block. If the XW2C is connected to a PLC module that handles both input and output signals (modules with “MD” in the part number), only the input portion of the PLC module can be used.
3
XW2Z
XW2Z
Unit: mm (inch)
3 XW2Z-PPPB FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)
Cable length L
Wiring Diagram
FCN-367J040-AU/F (mated side)
XG4M-4030 (mated side)
Part number XW2Z-050B XW2Z-100B XW2Z-150B XW2Z-200B XW2Z-300B XW2Z-500B
Cable length L 0.5 m (1.64 ft) 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft)
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
CQM1-ID213 CQM1-OD213 C200H-ID216 C200H-OD218 C200H-OD21B
C200H-ID111 C200H-ID217 C200H-OD219 C500-ID114 3G2A5-ID219 3G2A5-OD213
I/O points 32 points
Terminal block
XW2B-40G5 XW2B-40G4
64 points
Note: 32-point I/O modules use one Terminal Block and one dedicated cable. 64-point I/O modules use two Terminal Blocks and two dedicated cables.
Triangle mark
Dedicated cable XW2Z-PPPB
4
XW2Z
XW2Z
3 XW2Z-PPPD FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)
XW2Z-P00D
Part number XW2Z-100D XW2Z-150D XW2Z-200D XW2Z-300D XW2Z-500D
Cable length A 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft)
Cable length B 0.75 m (2.46 ft) 1.25 m (4.10 ft) 1.75 m (5.74 ft) 2.75 m (9.02 ft) 4.75 m (15.58 ft)
Cable length for A and B
B 250 (9.84)
Yellow
Note: 1. 2.
CN2 (black cable side) is wired to line A of CN1 and CN3 (yellow cable side) is wired to line B of CN1.
The G79-PC Cable for the G7TC Terminal Block cannot be used for the XW2C due to a difference in wiring.
Line Line AB
Black 500 (19.68)
A
Wiring Diagram
FCN-367J024-AU/F CN1 (mated side)
XG4M-2030 CN3 (mated side)
Triangle mark
XG4M-2030 CN2 (mated side)
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
CQM1-ID213 C200H-ID216
C200H-ID217 C500-ID114 3G2A5-ID219
I/O points 32 points
64 points
Terminal block
Dedicated cable
Two XW2C-20GS-IN16 input blocks One XW2Z-PPPD cable
Four XW2C-20GS-IN16 input blocks Two XW2Z-PPPD cables
5
XW2Z
Unit: mm (inch)
3 XW2Z-PPPH-P FOR 96-POINT CS1 PLC I/O MODULES (CONNECTOR TYPE)
XW2Z
XW2Z-P00H-1
A
XW2Z-P00H-2
A B
XW2Z-P00H-3
A B
C
Part number XW2Z-100H-1 XW2Z-200H-1 XW2Z-300H-1 XW2Z-500H-1
Cable length A 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft)
Part number XW2Z-100H-2 XW2Z-200H-2 XW2Z-300H-2 XW2Z-500H-2
Cable length A 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft)
Cable length B 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft)
Part number
XW2Z-100H-3 XW2Z-200H-3 XW2Z-300H-3 XW2Z-500H-3
A 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5m (16.40 ft)
Cable length
BC
0.75 ft (2.45 ft) 1 m (3.28 ft)
1.75 ft (5.74 ft) 2 m (6.56 ft)
2.75 ft (9.02 ft) 3 m (9.84 ft)
4.75 ft (15.58 ft)
5m (16.40 ft)
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
CS1W-ID291, CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD292
CS1W-ID291, CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD292
CS1W-ID291, CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD292
I/O points 96 .