Document
Global LCD Panel Exchange Center
www.panelook.com
Customer's Acceptance Specification
TO: LG Electronics Inc.
Accepted By:
Date :
Customer's Acceptance Specification Type 15.0 UXGA Color TFT/LCD Module
Model Name:IAUX14P
Document Control Number : CAS I-914P-L01
Issued By : T. TOKUDA
(C) Copyright International Display Technology 2002 All Rights reserved.
December 5,2002
CAS I-914P-L01
Date: December 5,2002
Sales Support International Display Technology
1/35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Customer's Acceptance Specification
i Contents
i Contents ii Record of Revision 1.0 Handling Precautions 2.0 General Description 2.1 Characteristics 2.2 Functional Block Diagram 3.0 Absolute Maximum Ratings 4.0 Optical Characteristics 4.1 Luminance Uniformity 5.0 Signal Interface 5.1 Connectors 5.2 Interface Signal Connector 5.3 Interface Signal Description 5.3.1 E-EDID 5.4 Interface Signal Electrical Characteristics 5.4.1 Signal Electrical Characteristics for LVDS Receiver 5.4.2 LVDS Receiver Internal Circuit 5.4.3 Recommended Guidelines for Motherboard PCB Design and Cable Selection 5.5 Signal for Lamp connector
6.0 Pixel format image 7.0 Parameter guide line for CFL Inverter 8.0 Interface Timings 8.1 Timing Characteristics 8.2 Timing Definition 9.0 Power Consumption 10.0 Power ON/OFF Sequence 11.0 Mechanical Characteristics 12.0 National Test Lab Requirement 13.0 Packaging Specification 14.0 Label
(C) Copyright International Display Technology 2002 All Rights reserved.
December 5,2002
CAS I-914P-L01
2/35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Customer's Acceptance Specification
ii Record of Revision
Date
Document Revision
December 5,2002 CAS I-914P-L01
Page All
Summary
First Edition for LG Electronics Inc. Based on Engineering Spec. OEM I-914P-01.
(C) Copyright International Display Technology 2002 All Rights reserved.
December 5,2002
CAS I-914P-L01
3/35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Customer's Acceptance Specification
1.0 Handling Precautions
O If any signals or power lines deviate from the power on/off sequence, it may cause shorten the life of the LCD module.
O The LCD panel and the CFL are made of glass and may break or crack if dropped on a hard surface, so please handle them with care.
O CMOS-ICs are included in the LCD panel. They should be handled with care, to prevent electrostatic discharge.
O Do not press the reflector sheet at the back of the LCD module to any directions. O Do not stick the adhesive tape on the reflector sheet at the back of the LCD module. O Please handle care when mount in the system cover. Mechanical damage for lamp .