Document
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
RECORD OF REVISION
The upper section : Previous revision
The lower section : New revision Date
Sheet No.
Page
Summary
Jun. 18, 2007
IPS4PS-2611-AX080E002B-1 IPS4PS-2611-AX080E002B-2
11-2/2 11-2/2
Changing Inverter and FFC (Add Rev.B)
Aug. 28, 2007
IPS4PS-2611-AX080E002B-2 IPS4PS-2611-AX080E002B-3
11-2/2 11-2/2
Added buffer material (Add Rev.C)
Sep. 10, 2007
IPS4PS-2611-AX080E002B-3 IPS4PS-2611-AX080E002B-4
11-2/2 11-2/2
Changing Source Driver (Add Rev.D)
IPS Alpha Technology, Ltd. Date Sep. 10, 2007 Sheet No. IPS4PS 2602 -AX080E002B-4 Page 2-1/1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
DESCRIPTION
The following specifications are applied to the following TFT module. Note : Inverter for back light unit is built in this module.
Product Name : AX080E002B
Effective Display Area Number of Pixels Pixel Pitch Color Pixel Arrangement Display Mode Top Polarizer Type Number of Colors Viewing Angle Range
Input Signal Back Light
General Specifications
ዖ(H)697.685×(V)392.256
(mm)
ዖ(H)1,366×(V)768
(pixels)
ዖ(H)0.51075×(V)0.51075
(mm)
: R+G+B Vertical Stripe
: Transmissive Mode Normally Black Mode
: Anti-Glare
ዖ16,777,216
(colors)
: Wide Version (Horizontal & Vertical : 178qat Ǿ=0q,90qወ180q,270q, CR҈10ዅ
: 1-channel LVDS (LVDS:Low Voltage Differential Signaling)
: 16 pcs. of EEFL
External Dimensions Weight
: (H)760.0 x (V)450.0 x (t)49.0 max (mm)
ዖTyp 7,000
(g)
IPS Alpha Technology, Ltd. Date Sep. 10, 2007 Sheet No. IPS4PS 2603 -AX080E002B-4 Page 3-1/1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center 1. ABSOLUTE MAXIMUM RATINGS
www.panelook.com
1.1 Environmental Absolute Maximum Ratings
ITEM
Operating Min. Max.
Temperature
0
65 1)
Humidity
2)
Vibration
- 4.9(0.5G)
Shock
- 29.4(3G)
Corrosive Gas
Not Acceptable
Illumination at LCD Surface
-
50,000
Storage Min. Max.
-20 60
2) - 14.7(1.5G) - 294(30G)
Not Acceptable
- 50,000
Unit
͠
RH m/s2 m/s2
-
1x
Note 5)
3) 4)
Note 1) Temperature of display screen's surface. 2) Ta៑40 ᚴᙩᙩᙩRelative humidity should be less than 90%RH max. Dew is prohibited. Taዚ40 ̕̕̕͠Relative humidity should be lower than the moisture of the 90%RH at 40͠. 3) Frequency of the vibration is between 15Hz and 100Hz. (Remove the resonant point) 4) Pulse width of the shock is 10 ms. All mounting holes shall be fixed. (Rear mountng holes) 5) The brightness of a lamp tends to drop at low temperature. Besides, the life-time becomes shorter
at low temperature. Long operation under low temperature may cause some portion of display area to be reddish for several minutes after turning on the product. However, it does not affect the characteristics and reliability of the product.
1.2 Electrical Absolute Maximum Ratings
(1)TFT Module
Vss = 0 V
ITEM
SYMBOL Min. Max. Unit Note
Power Supply Voltage
ዲDD
-0.3 13.2
V
Input Voltage for logic
ዲ1
-0.3 3.6
V
1)
Electrostatic Durability
ዲESD0 ዲESD1
±100 ±8
V 2), 3) kV 2), 4)
Noteޓ1)It is applied to pixel data signal and clock signal.
ޓޓޓ2)Discharge Coefficientዖ200pF-250ǡ, Environmentalዖ25͠-70RH
ޓޓޓ3)It is applied to I/F connector pins.
ޓޓޓ4)It is applied to the surface of a metallic bezel and a LCD panel.
(2) Back-light Inverter ITEM
Input Voltage ON/OFF Control Input Voltage
Brightness Control Voltage
SYMBOL Vin
ON/OFF BRT
Min. -0.3 -0.3 -0.3
Vss = 0 V Max. Unit 28.0 V 5.5 V 5.5 V
Note
IPS Alpha Technology, Ltd. Date Sep. 10, 2007 Sheet No. IPS4PS 2604 -AX080E002B-4 Page 4-1/1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
2. INITIAL OPTICAL CHARACTERISTICS
The following optical characteristics are measured under stable conditions. It takes about 30 minutes
to reach stable conditions. The measuring point is the center of display area unless otherwise noted.
The optical characteristics should be measured in a dark room or equivalent state.
Measuring equipmentዖCS-1000A or equivalent (Except MPRT)
MPRT-1000 (MPRT)
Ambient Temperature =25͠, VDD=12.0V, f V=60Hz, VBL=24V, BRT=3.3V
ITEM
SYMBOL CONDITION Min. Typ. Max. UNIT
Contrast Ratio
ዟዮ
700 950
--
Rise Response Time
Fall
ton toff
- 8 20 ms - 6 20 ms
Brightness of white
Bwh
400 500
- cd/m2
Brightness uniformity Buni
- - 30
Color
Red
Chromaticity
ዄCIEዅ Green
ǿ ጕ ǿ ጕ
ǰዙ° 1)
0.62 0.30 0.27 0.60
0.65 0.68 0.33 0.36 0.30 0.33 0.63 0.66
-
ǿ Blue
ጕ
0.12 0.15 0.18 0.04 0.07 0.10
White
ǿ ጕ
0.243 0.245
0.273 0.275
0.303 0.305
Variation of Red
Color Position
(CIE)
Green.