16 Mbit SPI Serial Flash
SST25VF016B
16 Mbit SPI Serial Flash
Features
• Single Voltage Read and Write Operations - 2.7-3.6V
• Serial Interface ...
Description
SST25VF016B
16 Mbit SPI Serial Flash
Features
Single Voltage Read and Write Operations - 2.7-3.6V
Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
High Speed Clock Frequency - Up to 50 MHz
Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention
Low Power Consumption: - Active Read Current: 10 mA (typical) - Standby Current: 5 µA (typical)
Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks - Uniform 64 KByte overlay blocks
Fast Erase and Byte-Program: - Chip-Erase Time: 35 ms (typical) - Sector-/Block-Erase Time: 18 ms (typical) - Byte-Program Time: 7 µs (typical)
Auto Address Increment (AAI) Programming - Decrease total chip programming time over Byte-Program operations
End-of-Write Detection - Software polling the BUSY bit in Status Register - Busy Status readout on SO pin in AAI Mode
Hold Pin (HOLD#) - Suspends a serial sequence to the memory without deselecting the device
Write Protection (WP#) - Enables/Disables the Lock-Down function of the status register
Software Write Protection - Write protection through Block-Protection bits in status register
Temperature Range - Commercial: 0°C to +70°C - Industrial: -40°C to +85°C
Packages Available - 8-lead SOIC (200 mils) - 8-contact WSON (6mm x 5mm)
All devices are RoHS compliant
Product Description
The 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pi...
Similar Datasheet