Round Force Sensing Resistor
FSR 400 Data Sheet
FSR 400 Series Round Force Sensing Resistor
Description
Features and Benefits
• Actuation Force as...
Description
FSR 400 Data Sheet
FSR 400 Series Round Force Sensing Resistor
Description
Features and Benefits
Actuation Force as low as 0.1N and sensitivity range to 10N.
Easily customizable to a wide range of sizes
Highly Repeatable Force Reading; As low as 2% of initial reading with repeatable actuation system
Cost effective
Ultra thin; 0.35mm
Robust; up to 10M actuations
Simple and easy to integrate
Interlink Electronics FSRTM 400 series is part of the single zone Force Sensing ResistorTM family. Force Sensing Resistors, or FSRs, are robust polymer thick film (PTF) devices that exhibit a decrease in resistance with increase in force applied to the surface of the sensor. This force sensitivity is optimized for use in human touch control of electronic devices such as automotive electronics, medical systems, and in industrial and robotics applications.
The standard 400 sensor is a round sensor 7.62mm in diameter. Custom sensors can be manufactured in sizes ranging from 5mm to over 600mm. Female connector and short tail versions can also be ordered.
Industry Segments
Game controllers Musical instruments Medical device controls Remote controls Navigation Electronics Industrial HMI Automotive Panels Consumer Electronics
Figure 1 - Typical Force Curve
Figure 2 - Typical Schematic
Interlink Electronics - Sensor Technologies
www.interlinkelectronics.com
FSR 400
P/N: 30-49649
Device Characteristics
Applications
Detect & qualify press Sense w...
Similar Datasheet