Glass Passivated Single-Phase Bridge Rectifier
Naina Semiconductor Ltd.
GBPC50GBPC50W
Glass Passivated Single-Phase Bridge Rectifier, 50A
Features • Glass passivated...
Description
Naina Semiconductor Ltd.
GBPC50GBPC50W
Glass Passivated Single-Phase Bridge Rectifier, 50A
Features Glass passivated chip junction Low reverse leakage current High surge current capability Low power loss High efficiency Electrically isolated metal case for
maximum heat dissipation
Mechanical Data Case: Molded plastic body with heatsink Terminals: Plated lead Solderable (Add “W” suffix for Wire Leads) Polarity: As marked on Case Mounting: Through hole for #10 Screw Mounting Torque: 20 in-lbs max. Weight: 18 grams (approx)
Maximum Ratings & Electrical Characteristics (TA = 250C unless otherwise noted)
Parameter
GBPC50(W)
Symbol
Units
005 01 02 04 06 08 10 12
Maximum repetitive peak reverse voltage
VRRM
50 100 200 400 600 800 1000 1200
V
Maximum RMS voltage
VRMS
35 70 140 280 420 560 700 840
V
Maximum DC blocking voltage
VDC 50 100 200 400 600 800 1000 1200 V
Average rectified output current
IO
50 A
Non-repetitive peak forward surge current,
single half sine-wave superimposed on rated
IFSM
450
A
load (JEDEC method)
DC forward voltage drop per element @ 25A
VF
1.1
V
Peak reverse current at rated DC blocking voltage
TC = 25oC
IR
10 µA
Typical junction capacitance (Note 1)
CJ
Typical thermal resistance (Note 2)
RθJ-C
RMS isolation voltage
VISO
Operating and Storage temperature
TJ, TSTG
NOTES:
(1) Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
(2) Thermal resistance from Junction to Case per leg
400 ...
Similar Datasheet