Document
Ordering number:EN2760
NPN Epitaxial Planar Silicon Transistor
2SC4407
VHF/UHF Mixer, Local Oscillator Applications
Applications
· VHF/UHF mixers, frequency converters, local oscillators.
Package Dimensions
unit:mm 2059B
Features
· High cutoff frequency : fT=3.0GHz typ · High power gain : PG=12dB typ (f=0.9GHz) · Small noise figure : NF=3.0dB typ (f=0.9GHz) · Very small-sized package permitting 2SC4407-
applied sets to be made smaller and slimmer.
Specifications
2.1 1.250
0.425
0.425
[2SC4407]
0.3
3
0.15
0.2
0~0.1
12 0.65 0.65
2.0
0.3 0.6 0.9
1 : Base 2 : Emitter 3 : Collector SANYO : MCP
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation Junction Temperature Storage Temperature
VCBO VCEO VEBO
IC PC Tj
Tstg
Conditions
Ratings 25 15 3 50
150 150 –55 to +150
Unit V V V mA
mW ˚C ˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Reverse Transfer Capacitance
ICBO IEBO hFE
fT Cob Cre
VCB=15V, IE=0 VEB=2V, IC=0 VCE=10V, IC=5mA VCE=10V, IC=10mA VCB=10V, f=1MHz VCB=10V, f=1MHz
* : The 2SC4407 is classified by 5mA hFE as follows : (Note) Marking : KY
hFE rank : 2, 3, 4 • For CP package version, use the 2SC4270.
40 2 80
60 3 120 100 4 200
Ratings min typ
40* 1.5 3.0
0.7 0.45
max 0.1 10
200*
1.0
Unit
µA µA
GHz pF pF
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D1598HA (KT)/4298TA, TS No.2760–1/5
Power Gain Noise Figure
Parameter
NF Test Circuit
2SC4407
Symbol
Conditions
PG VCE=10V, IC=10mA, f=0.9GHz NF VCE=10V, IC=3mA, f=0.9GHz
See specified Test Circuit.
Ratings min typ max
12
3.0
Unit dB dB
900MHz C1 ~5pF C2 ~10pF C3 ~10pF C4 ~10pF C5 ~10pF L1 W ≈ 1.5mm, l ≈ 25mm
Strip line L2 W ≈ 4mm, l ≈ 25mm
Strip line L3 0.5φ, l ≈ 40mm CH 2t+bead core
No.2760–2/5
2SC4407
No.2760–3/5
2SC4407
No.2760–4/5
2SC4407
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed .