Ultrasonic Sensor
DYP serial Ultrasonic Sensor
DYP-ME007TX ultrasonic sensor is non-contact distance measurement module, which is also com...
Description
DYP serial Ultrasonic Sensor
DYP-ME007TX ultrasonic sensor is non-contact distance measurement module, which is also compatible with electronic brick. Output is Serial ports output It’s designed for easy modular project usage with industrial performance.
Features
Detecting range: 3cm-4m Best in 30 degree angle Electronic brick compatible interface 5VDC power supply Breadboard friendly Dual transducer Arduino library ready
Specifications
Supply voltage
5v
Global Current Consumption 15 mA
Ultrasonic Frequency
40k Hz
Maximal Range
400 cm
Minimal Range
3 cm
Resolution
1 cm
Baud rate
9600 n,8,1
Outline Dimension
Serial out format
43x20x15 mm
Practical test of performance, Best in 30 degree angle
This module in use of single chip will occupy a IO mouth, connect power
supply, module 50ms a location inside each, and from the pin OUT a frame,
including 4 8 bits of data and frame format 0XFF + H_DATA + for: L_DATA +
SUM
1. 0XFF: for a frame to start data for judgment.
2. H_DATA: distance data of high eight.
3. L_DATA: distance data of low 8 bits.
4. SUM: data and, used to come to pass. Its 0XFF H_DATA + + L_DATA =
SUM (only low 8)
Note: H_DATA and L_DATA synthetic 16 data, namely to unit of millimeter distance value.
...
Similar Datasheet