Document
HSMx-A2-xx-xxxxx Bi-Color HSMx-A3xx-xxxxx Tri-Color Surface Mount LED Indicators, PLCC-4 SMT LEDs
Data Sheet
Description
This family of SMT LEDs is packaged in the industry standard PLCC-4 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions.
To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color to provide close uniformity.
These LEDs are compatible with IR and TTW solder reflow process.
This super wide viewing angle at 120° together with the built in reflector pushing up the intensity of the light output makes these LED suitable to be used in the interior electronics signs. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. This is suitable for general backlighting in automotive interior, office equipment, industrial equipment, and home appliances.
Features
Industry Standard PLCC-4 package (Plastic Leaded Chip Carrier)
High reliability LED package due to enhanced silicone resin material
High brightness using AlInGaP and InGaN dice technologies
Available in full selection of colors Super wide viewing angle at 120° Available in 8 mm carrier tape on 7-inch reel Compatible with IR soldering process
Applications
Electronic signs and signals – Interior full color sign – Variable message sign
Interior automotive – Instrument cluster backlighting – Central console backlighting – Cabin backlighting
Office automation, home appliances, industrial equipment – Front panel backlighting – Display backlighting
CAUTION: HSMF-Axxx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
Package Dimensions
2.8 ± 0.2
2.2 ± 0.2 (2)
(3)
0.1 TYP.
1.9 ± 0.2
0.8 ± 0.1
3.2 ± 0.2
(1)
CATHODE MARKING
NOTE: 1. ALL DIMENSIONS IN mm.
Tri Color 1 Cathode (Color 1) 2 Common Anode 3 Cathode (Color 3) 4 Cathode (Color 2) Bi Color 1 Cathode (Color 1) 2 Anode (Color 1) 3 Cathode (Color 2) 4 Anode (Color 2)
3.5 ± 0.2
(4) 0.7 ± 0.1
0.8 ± 0.3
0.5 ± 0.1
Device Selection Guide
Bi Color
Part Number HSMF-A201- xxxxx HSMF-A202- xxxxx HSMF-A203- xxxxx HSMF-A204- xxxxx HSMF-A205- xxxxx HSMF-A206- xxxxx HSMF-A211- xxxxx HSMF-A212- xxxxx HSMF-A222- xxxxx HSMF-A226- xxxxx
Color 1 GaP Red GaP Red GaP Red GaP Orange GaP Orange GaP Yellow AlGaAs Red AlGaAs Red AlInGaPRed AlInGaP Amber
Color 2 GaP Yellow Green GaP Yellow GaP Emerald Green GaP Yellow Green GaP Emerald Green GaP Yellow Green GaP Yellow Green GaP Yellow AlInGaP Amber AlInGaP Yellow Green
2
Part Number
Color 1
Min. Iv @ 20 mA
Typical Iv @ 20 mA
Bin ID (mcd)
(mcd)
Color 2
Min. Iv @ 20 mA
Bin ID
(mcd).