High-side Power Distribution Switch
Advance Datasheet
High-side Power Distribution Switch with Enable and Flag AP2820
General Description
The AP2820 is an...
Description
Advance Datasheet
High-side Power Distribution Switch with Enable and Flag AP2820
General Description
The AP2820 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS(ON), 60mΩ, is designed to meet USB voltage drop requirements. The IC includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout (UVLO) function is used to ensure the device remain off unless there is a valid input voltage present. A FLAG output is available to indicate fault conditions to the local USB controller.
The AP2820 is available in standard packages of SOIC-8 and MSOP-8.
Applications
USB Power Management USB Bus/Self Powered Hubs Hot-plug Power Supplies Battery-charger Circuits Notebooks, Motherboard PCs
Features
Low MOSFET on Resistance: 60mΩ Compliant to USB Specifications Available 2 Versions of Load Ability:
Guarantee 2.0A Continuous Load for A/B/C/D Version Guarantee 2.5A Continuous Load for E/F/G/H Version Logic Level Enable Pin: Available with Active-high or Active-low Version Operating Voltage Range: 2.7V to 5.5V Low Supply Current: 75μA (Typ.) (For A/B/C/D versions) 80μA (Typ.) (For E/F/G/H versions) Low Shutdown Current: 1.0μA (Max) Under-voltage Lockout Soft Start-up Over-current Protection Over Temperatur...
Similar Datasheet