DatasheetsPDF.com

ITR8117 Dataheets PDF



Part Number ITR8117
Manufacturers Everlight Electronics
Logo Everlight Electronics
Description Opto Interrupter
Datasheet ITR8117 DatasheetITR8117 Datasheet (PDF)

EVERLIGHT ELECTRONICS CO, LTD. MODEL NO: ITR8117 ■ Package Dimensions : Device Number: DRX-081-007 REV: 1.2 Ecn: Page:1of8 Office: NO 25,Lane.76, Chung Yang Rd., Sec.3, Tucheng, Taipei 236, Taiwan, R.O.C. TEL: 886-2-2267-2000,2267-9936(22Lines) FAX: 886-2-2267-6189 http: //www.everlight.com 00/03/26 11:23 PM 1 8117.doc EVERLIGHT ELECTRONICS CO, LTD. MODEL NO: ITR8117 Device Number: DRX-081-007 REV: 1.2 Ecn: Page:2of8 ◎Notes: 1.All dimensions are in millimeter. 2.General Tolerance:± 0.

  ITR8117   ITR8117



Document
EVERLIGHT ELECTRONICS CO, LTD. MODEL NO: ITR8117 ■ Package Dimensions : Device Number: DRX-081-007 REV: 1.2 Ecn: Page:1of8 Office: NO 25,Lane.76, Chung Yang Rd., Sec.3, Tucheng, Taipei 236, Taiwan, R.O.C. TEL: 886-2-2267-2000,2267-9936(22Lines) FAX: 886-2-2267-6189 http: //www.everlight.com 00/03/26 11:23 PM 1 8117.doc EVERLIGHT ELECTRONICS CO, LTD. MODEL NO: ITR8117 Device Number: DRX-081-007 REV: 1.2 Ecn: Page:2of8 ◎Notes: 1.All dimensions are in millimeter. 2.General Tolerance:± 0.2mm 3.Lead spacing is measured where the lead emerge from the package. 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 6.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. ■ Descriptions: The ITR8117(Slot Optical Switch) is a gallium arsenide infrared emitting diode which is coupled with a silicon photo transistor in a plastic housing. The packaging system is designed to optimizes the mechanical resolution, coupling efficiency, and insulates ambient light. The slot in the housing a provides a means of interrupting the signal with printer, scanner, copier, or other opaque material, switching the output from an ” ON” to” OFF” state. ■ Features: .Wide gap between light emitter and detector(2.1mm) .High sensing accuracy .PWB mounting type package ■ Applications: .Copier .Printer .Facsimile .Ticket vending machine .Opto-electronic switch 00/03/26 11:23 PM 2 8117.doc EVERLIGHT ELECTRONICS CO, LTD. MODEL NO: ITR8117 Device Number: DRX-081-007 REV: 1.2 Ecn: Page:3of8 ■ Absolute Maximum Ratings (Ta=25℃) Parameter Power Dissipation at(or below) 25℃ Free Air Temperature Input Reverse Voltage Forward Current Peak Forward Current Pulse width ≦100μs, Duty cycle=1% Collector Power Dissipation Output Collector Current Collector-Emitter Voltage Emitter-Collector Voltage Operating Temperature Storage Temperature Lead Soldering Temperature (1/16 inch from body for 5 seconds) Symbol Pd VR IF IFP PC IC VCEO VECO Topr Tstg Tsol Ratings 75 5 50 1 75 20 30 5 -25~+85 -40~+85 260 Unit mW V mA A mW mA V V ℃ ℃ ℃ ■ Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Input Output Forward Voltage VF - 1.2 1.6 V Reverse Current IR - - 10 μA Peak Wavelength λP - 940 - nm View Angle 2€1/2 - 60 - Deg Collector Dark Current ICEO - - 100 nA IF=20mA VR=5V IF=20mA IF=20mA VCE=10V C-E Saturation Voltage Transfer Collector Current Characteristic Rise time Fall time VCE(sat) - - 0.4 V IC(ON) 0.5 tr - 20 tf - 20 - mA - μsec - μsec IC=0.5mA IF=20mA VCE=5V IF=20mA VCE=5V IC=1mA RL=1KΩ 00/03/26 11:23 PM 3 8117.doc EVERLIGHT ELECTRONICS CO, LTD. MODEL NO: ITR8117 ■ Typical Characteristics For IR Device Number: DRX-081-007 REV: 1.2 Ecn: Page:4of8 00/03/26 11:23 PM 4 8117.doc EVERLIGHT ELECTRONICS CO, LTD. MODEL NO: ITR8117 ■Typical Characteristics For PT Device Number: DRX-081-007 REV: 1.2 Ecn: Page:5of8 ■Typical Characteristics For ITR 00/03/26 11:23 PM 5 8117.doc EVERLIGHT ELECTRONICS CO, LTD. MODEL NO: ITR8117 ■Reliability test item and condition Device Number: DRX-081-007 REV: 1.2 Ecn: Page:6of8 The reliability of products shall be satisfied with item listed below: Confidence level :90% LTPD:10% Parameter Temperature Cycle Purpose & Condition Evaluates product's ability to withstand exposure to high temperature, low temperature, and temperature Failure Judgement Criteria IR≧U x 2 Ic(on)≦L x 0.8 VF≧U x 1.2 Samples(n) Defective(c) n =22,c=0 variation between two limit temperature. Standard test Condition: 85℃~25℃~-55℃~25℃ U:Upper specification limit Thermal Shock 30min 5min 30min 50 cycle Evaluates product's ability to withstand rapid temperature 5min L:Lower specification limit n =22,c=0 change Standard test High Temperature Storage Condition: 85℃ ~ -55℃ 5min 5min 50cycle Evaluates product's ability to withstand prolonged storage n =22,c=0 at high temperature Standard Low Temperature Storage test Condition: Temperature : 100 ℃ Time : 1000hrs Evaluates product's ability to withstand prolonged storage at low temperature Standard test Condition: Temperature : -55 ℃ Time : 1000hrs n =22,c=0 00/03/26 11:23 PM 6 8117.doc MODEL NO: ITR8117 EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-081-007 REV: 1.2 Ecn: Page:7of8 Parameter Operating Life Test High Temperature High Humidity Soldering Heat Purpose & Condition Evaluates product's endurance to prolonged electrical or temperature s.


ITR9803 ITR8117 ITR8402-F-A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)