DatasheetsPDF.com

1N4751 Dataheets PDF



Part Number 1N4751
Manufacturers SEMTECH
Logo SEMTECH
Description SILICON PLANAR POWER ZENER DIODES
Datasheet 1N4751 Datasheet1N4751 Datasheet (PDF)

1N4727...1N4764 SILICON PLANAR POWER ZENER DIODES for use in stabilizing and clipping circuits with high power rating. Standard zener voltage tolerance is ±10%. Add suffix "A" for ±5% tolerance and suffix "B" for ±2% tolerance. Other tolerances are available upon request. Max. 0.7 Max. 2.8 Min. 25.4 Black Cathode Band Black Part No. Black "ST" Brand XXX ST Max. 4.2 Min. 25.4 Glass Case DO-41 Dimensions in mm Absolute Maximum Ratings (Ta = 25 OC) Parameter Symbol Value Power Dissipati.

  1N4751   1N4751


Document
1N4727...1N4764 SILICON PLANAR POWER ZENER DIODES for use in stabilizing and clipping circuits with high power rating. Standard zener voltage tolerance is ±10%. Add suffix "A" for ±5% tolerance and suffix "B" for ±2% tolerance. Other tolerances are available upon request. Max. 0.7 Max. 2.8 Min. 25.4 Black Cathode Band Black Part No. Black "ST" Brand XXX ST Max. 4.2 Min. 25.4 Glass Case DO-41 Dimensions in mm Absolute Maximum Ratings (Ta = 25 OC) Parameter Symbol Value Power Dissipation Ptot 1 1) Junction Temperature Tj 200 Storage Temperature Range TS - 65 to + 200 1) Valid provided that leads at a distance of 8 mm from case are kept at ambient temperature. Unit W OC OC Characteristics at Ta = 25 OC Parameter Symbol Max. Thermal Resistance Junction to Ambient Air RthA 170 1) Forward Voltage at IF = 200 mA VF 1.2 1) Valid provided that leads at a distance of 8 mm from case are kept at ambient temperature. Unit K/W V SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company ® listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 12/06/2007 1N4727...1N4764 Type Zener Voltage Range 3), 5) VZnom lZT Maximum Zener Impedance 1) rZJT rZJK at IZK Maximum Reverse Leakage Current IR at VR Maximum Surge Current 4) at Ta = 25 OC Maximum Regulator Current 2) V mA Ω Ω mA µA V IZSM (mA) IZM (mA) 1N4727 3 83 10 400 1 150 1 1375 275 1N4728 3.3 76 10 400 1 150 1 1375 275 1N4729 3.6 69 10 400 1 100 1 1260 252 1N4730 3.9 64 9 400 1 100 1 1190 234 1N4731 4.3 58 9 400 1 50 1 1070 217 1N4732 4.7 53 8 500 1 10 1 970 193 1N4733 5.1 49 7 550 1 10 1 890 178 1N4734 5.6 45 5 600 1 10 2 810 162 1N4735 6.2 41 2 700 1 10 3 730 146 1N4736 6.8 37 3.5 700 1 10 4 660 133 1N4737 7.5 34 4 700 0.5 10 5 605 121 1N4738 8.2 31 4.5 700 0.5 10 6 550 110 1N4739 9.1 28 5 700 0.5 10 7 500 100 1N4740 10 25 7 700 0.25 10 7.6 454 91 1N4741 11 23 8 700 0.25 5 8.4 414 83 1N4742 12 21 9 700 0.25 5 9.1 380 76 1N4743 13 19 10 700 0.25 5 9.9 344 69 1N4744 15 17 14 700 0.25 5 11.4 304 61 1N4745 16 15.5 16 700 0.25 5 12.2 285 57 1N4746 18 14 20 750 0.25 5 13.7 250 50 1N4747 20 12.5 22 750 0.25 5 15.2 225 45 1N4748 22 11.5 23 750 0.25 5 16.7 205 41 1N4749 24 10.5 25 750 0.25 5 18.2 190 38 1N4750 27 9.5 35 750 0.25 5 20.6 170 34 1N4751 30 8.5 40 1000 0.25 5 22.8 150 30 1N4752 33 7.5 45 1000 0.25 5 25.1 135 27 1N4753 36 7 50 1000 0.25 5 27.4 125 25 1N4754 39 6.5 60 1000 0.25 5 29.7 115 23 1N4755 43 6 70 1500 0.25 5 32.7 110 22 1N4756 47 5.5 80 1500 0.25 5 35.8 95 19 1N4757 51 5 95 1500 0.25 5 38.8 90 18 1N4758 56 4.5 110 2000 0.25 5 42.6 80 16 1N4759 62 4 125 2000 0.25 5 47.1 70 14 1N4760 68 3.7 150 2000 0.25 5 51.7 65 13 1N4761 75 3.3 175 2000 0.25 5 56 60 12 1N4762 82 3 200 3000 0.25 5 62.2 55 11 1N4763 91 2.8 250 3000 0.25 5 69.2 50 10 1N4764 100 2.5 350 3000 0.25 5 76 45 9 1) The Zener Impedance is derived from the 60 Hz AC voltage which results when an AC current having an RMS value equal to 10% of the Zener Current (IZT or IZK) is superimposed on IZT or IZK. Zener Impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units. 2) Valid provided that leads at a distance of 8 mm from case are kept at ambient temperature. 3) Measured under thermal equilibrium and DC test conditions. 4) The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current IZT. 5) Tested with pulses tp = 20 ms. SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company ® listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 12/06/2007 1N4727...1N4764 Breakdowm characteristics Tj =constant(pulsed) mA 100 90 80 70 Iz 60 50 40 30 20 10 0 0 12 3 4 IN4727 IN4728 IN4730 IN4729 IN4731 IN4732 IN4733 IN4734 IN4735 56 78 Vz IN4736 IN4737 IN4738 IN4739 IN4740 IN4741 IN... Tj=25 oC 9 10 11 12 IN4742 IN4743 IN4744 IN4745 IN4746 IN4747 IN4748 IN4749 IN4750 IN4751 IN4752 IN4753 IN4754 IN4755 IN4756 IN4757 IN4758 IN4759 IN4760 IN4761 IN4762 IN4763 IN4764 mA 50 40 Iz 30 IN... Tj=25 oC 20 10 0 0 10 20 30 40 50 60 70 80 90 100 110 120 Vz SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company ® listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 12/06/2007 1N4727...1N4764 Pd. Total Power Dissipation (W) 1.0 0.8 0.6 0.4 0.2 0 0 100 200 TA, Ambient Temperature Fig. 1 Power Dissipation vs Ambient Temperature R JA Thermal Resistance Junction to Ambient (°C/W) 250 200 150 100 50 0 0 5 10 15 20 25 30 I, Lead Length (mm) Fig. 2 Typic.


1N4750 1N4751 1N4752


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)