Document
DBS2 THRU DBS10
Single Phase 1.0 AMP Glass Passivated Bridge Rectifiers
Specification
DBS2 THRU DBS10 Rev A
DBS2 THRU DBS10
Voltage Range 200 to 1000 Volts, Current 1.0 Ampere
Bridge Rectifier Datasheet
These are powerful bridge rectifiers with
enhanced Glass Passivated Junction P-N
chips. They are advanced rectifiers designed, tested and guaranteed to withstand a specified level of energy in the forward mode of operation. All of these rectifiers are designed for applications such as,switching convertors. They have the low negative leakage and low forward voltage drop, which allows these types to be operated directly from integrated circuits.
Symbol:
Features:
1A , 200 - 1000V Glass passivated junction Ideal for printed circuit board Thin body, flat lead High temperature soldering
guaranteed: 260 ℃ /10seconds/
0.375”(9.5mm)
Leads solderable per MIL-STD-202,Method 208
High reliability under 125℃
working environment, with the limit temperature 150℃
Outline Drawing : Dimensions in inches(millimeters)
DBS2 THRU DBS10Rev A
DBS2 THRU DBS10
Absolute Maximum Ratings
Tc = 25 , unless otherwise specified
Symbol
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current at Ta = 75℃
Peak Forward Surge Current 8.3ms single half sina-wave superimposed on rated load(JEDEC Method)
Maximum Instantaneous Forward Voltage at
1.0A
Maximum DC Reverse Current at Rated DC Blocking Voltage
25℃ 75℃
Typical Junction Capacitance(Note)
VRRM VRMS VDC IAV
IFSM VF
IR Cj
Typical Thermal Resistance
RθJA
Operation and Storage Temperature Range
TJ,TSTG
Note:Measured at 1MHz applied reverse voltage of 4.0 volts
DBS2
200 140 200
DBS4
400 280 400
DBS6
600 420 600
1.0
30.0
1.0 5.0 50.0 15 30
-55 to 105
DBS8
800 560 800
DBS10
1000 700 1000
Unit
Volts
Volts Volts
Amps
Amps
Volts uAmps uAmps
pF ℃/W
℃
Typical Performance Curves
Tc = 25 , unless otherwise specified
DBS2THRU DBS10 Rev A
DBS2 THRU DBS10
Quality Inspection
Based on MIL-STD-105E LEVEL II , set the acceptable level as below.
Item Critical
Major
Minor
0.10(Electrical)
AQL(%) 0.01
0.25(Physical)
1.00
Signification , Storage and Shipment
1. The signification on the bridge rectifier body can be determined by customer. It will be 100% followed up as the instruction from customer.
2. The parts will be packed in the boxes, and the quantity in one box can be offered by customer. The boxes will be delivered by internal express company.
3. Please keep the parts being stored in the environment with humidity lower than 75%.
DBS2 THRU DBS10Rev A
.