RT9702A

RT9702/A 80mΩ, 500mA/1.1A High Side Power Switches with Flag General Description Features The RT9702 and RT9702A are cost-effective, low voltage, single N-Channel MOSFET high-side power switches, optimized for self-powered and bus- powered Universal Serial Bus (USB) applications. The RT9702/A equipped with a charge pump circuitry to drive the internal MOSFET switch; the switch's low RDS(ON), 80mΩ, meets USB voltage drop requirements; and a flag output is available to indicate fault conditions to the local USB controller. Additional features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present, fault current is limited to typically 800mA for RT9702 in single port and 1.5A for RT9702A in dual ports in accordance with the USB power requirements, lower quiescent current as 25μA making this device ideal for portable battery-operated equipment. The RT9702/A is available in SOT-23-5 and TSOT-23-5 packages requiring minimum board space and smallest components. z Compliant to USB Specifications z Built-In (Typically 80mΩ) N-Channel MOSFET z Output Can Be Forced Higher Than Input (Off-State) z Low Supply Current : 25uA Typical at Switch On State 1uA Typical at Switch Off State z Guaranteed 500mA/RT9702 and 1.1A/RT9702A Continuous Load Current z Wide Input Voltage Ranges : 2V to 5.5V z...