DatasheetsPDF.com

1008HQ-12NXJLB Dataheets PDF



Part Number 1008HQ-12NXJLB
Manufacturers Coilcraft
Logo Coilcraft
Description Chip Inductors
Datasheet 1008HQ-12NXJLB Datasheet1008HQ-12NXJLB Datasheet (PDF)

Document 190-1 Chip Inductors – 1008HQ (2520) • Highest Q factors of any Coilcraft chip this body size, roughly 20% higher than our popular 1008CS and HS parts. • Exceptional SRFs, tight tolerance and batch consistency Coilcraft Designer’s Kit C323 contains samples of all 5% inductance tolerance parts. Kits with 2% tolerance are also available.To order, contact Coilcraft or purchase on-line at http://order.coilcraft.com.   Part number1 1008HQ-3N0X_L_2 1008HQ-4N1X_L_ 1008HQ-7N8X_L_2 .

  1008HQ-12NXJLB   1008HQ-12NXJLB


Document
Document 190-1 Chip Inductors – 1008HQ (2520) • Highest Q factors of any Coilcraft chip this body size, roughly 20% higher than our popular 1008CS and HS parts. • Exceptional SRFs, tight tolerance and batch consistency Coilcraft Designer’s Kit C323 contains samples of all 5% inductance tolerance parts. Kits with 2% tolerance are also available.To order, contact Coilcraft or purchase on-line at http://order.coilcraft.com.   Part number1 1008HQ-3N0X_L_2 1008HQ-4N1X_L_ 1008HQ-7N8X_L_2 1008HQ-10NX_L_ 1008HQ-12NX_L_ 1008HQ-18NX_L_ 1008HQ-22NX_L_ 1008HQ-33NX_L_ 1008HQ-36NX_L_ 1008HQ-39NX_L_ 1008HQ-47NX_L_ 1008HQ-56NX_L_ 1008HQ-68NX_L_ 1008HQ-82NX_L_ 1008HQ-R10X_L_   Inductance3 (nH) 3.0 @ 50 MHz 4.1 @ 50 MHz 7.8 @ 50 MHz 10 @ 50 MHz 12 @ 50 MHz 18 @ 50 MHz 22 @ 50 MHz 33 @ 50 MHz 36 @ 50 MHz 39 @ 50 MHz 47 @ 50 MHz 56 @ 50 MHz 68 @ 50 MHz 82 @ 50 MHz 100 @ 50 MHz Percent   SRF min6   DCR max7   Irms8   tolerance4 Q min5 (GHz) (Ohms) (A) 5 5 5 5,2 5,2 5,2,1 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2 5,2 70 @ 1500 MHz 75 @ 1500 MHz 75 @ 500 MHz 60 @ 500 MHz 70 @ 500 MHz 62 @ 350 MHz 62 @ 350 MHz 75 @ 350 MHz 65 @ 350 MHz 75 @ 350 MHz 75 @ 350 MHz 75 @ 350 MHz 80 @ 350 MHz 80 @ 350 MHz 62 @ 350 MHz 8.10 6.20 3.80 3.60 2.80 2.70 2.05 1.70 1.40 1.30 1.45 1.23 1.15 1.06 0.82 0.04 0.05 0.05 0.06 0.06 0.07 0.07 0.09 0.09 0.09 0.12 0.12 0.13 0.16 0.16 1.6 1.6 1.6 1.6 1.5 1.4 1.4 1.3 1.3 1.3 1.2 1.2 1.1 1.1 1.0 1. When ordering, specify tolerance, termination and packaging codes: 1008HQ-R10XGLC Tolerance: F = 1%  G = 2%  J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape Factory order only, not stocked (7500 parts per full reel). 2. Part is wound on low profile coilform. 3. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 4. Tolerances in bold are stocked for immediate shipment. 5. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 6. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD­‑D test fixture. 7. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. 8. Current that causes a 15°C temperature rise from 25°C ambient. 9. Electrical specifications at 25°C. For part marking data, visit http://www.coilcraft.com/colrcode.cfm. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ceramic Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  32.4 – 35.7 mg;   17.1 – 17.7 mg (Low profile parts) Ambient temperature  –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging  2000/7″ reel; 7500/13″ reel Standard height parts:  Plastic tape:  8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.8 mm pocket depth Low profile parts:  Plastic tape:  8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth PCB washing  Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Document 190-1  Revised 02/23/15 Q Factor Inductance (nH) Document 190-2 Chip Inductors – 1008HQ Series (2520) Typical Q vs Frequency Typical L vs Frequency 120 110 100 90 80 70 60 50 40 30 20 10 0 10 68 nH 47 nH 22 nH 10 nH 3.0 nH 100 nH 100 1000 Frequency (MHz) 10000 120 110 100 90 80 70 60 50 40 30 20 10 0 1 100 nH 68 nH 47 nH 22 nH 10 nH 3.0 nH 10 100 1000 10000 Frequency (MHz) Irms Derating 120 110 100 90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) B overall F AG C Pick and place material I J H E terminal F D Terminal wraparound: approx 0.015/0,38 both ends I Recommended Land Pattern A B C D max max   max* ref E F G H I J 0.115 0.110 0.080 0.020 .


1008HQ-82NXGLC 1008HQ-12NXJLB 1008HQ-56NXJLC


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)