Freescale Semiconductor Technical Data
High Accuracy Low g Inertial Sensor
MEMS Sensing, State Machine ASIC
The MMA690xQ...
Freescale Semiconductor Technical Data
High Accuracy Low g Inertial Sensor
MEMS Sensing, State Machine ASIC
The MMA690xQ is a dual axis, Low g, XY, Sensor based on Freescale’s HARMEMS technology, with an embedded DSP ASIC, allowing for additional processing of the digital signals.
Features
Sensitivity in X and Y axes ±3.5 or ±5.0g full-scale range per axis AEC-Q100 qualified, Rev. G, grade 2 (-40 ≤ TA ≤ 105 °C) 50 Hz second order low-pass filter Unsigned 11-bits digital data output SPI-compatible serial interface Capture/hold input for system-wide synchronization support 3.3 or 5.0V single supply operation On-chip temperature sensor and voltage
regulator Bi-directional internal self-test Minimal external component requirements Pb-free 16-pin QFN package Pulse-code modulated output available for device evaluation
Typical Applications
With a ±3.5g or ±5.0g full scale range, the newly designed, high accuracy sensor, enables Electronic Stability Control (ESC) designers to accommodate higher original signal noise level without sacrificing resolution.
Tilt Measurement Electronic Parking Brake
ORDERING INFORMATION
Device Name
Range
Shipping
MMA6900(K)Q MMA6901(K)Q
±3.5 g ±5.0 g
Tubes
MMA6900(K)QR2 MMA6901(K)QR2
±3.5 g ±5.0 g
Tape and Reel
“K” suffix indicates the device is manufactured with an alternate silicon sourcing
MMA690xQ Rev 2.0, 11/2010
MMA690xQ
DUAL AXIS SPI INERTIAL SENSOR
Bottom View
16-PIN QFN 98ASA10571D CASE 1477-02
Top Vie...