DatasheetsPDF.com

TL-T2Y1 Dataheets PDF



Part Number TL-T2Y1
Manufacturers Omron
Logo Omron
Description Slim Proximity Sensor
Datasheet TL-T2Y1 DatasheetTL-T2Y1 Datasheet (PDF)

Slim Proximity Sensor TL-T Slim Model of Width 12 mm. • Ideal for side-by-side mounting. Be sure to read Safety Precautions on page 5. Ordering Information Appearance Sensing distance Output specifications Model Output configuration Shielded 2 mm DC 3-wire models AC 2-wire models NPN PNP NO TL-T2E1 TL-T2F1 TL-T2Y1 NC TL-T2E2 --TL-T2Y2 Unshielded 5 mm DC 3-wire models NPN AC 2-wire models TL-T5ME1 TL-T5MY1 TL-T5ME2 TL-T5MY2 Note: Models with a different frequency are available. .

  TL-T2Y1   TL-T2Y1


Document
Slim Proximity Sensor TL-T Slim Model of Width 12 mm. • Ideal for side-by-side mounting. Be sure to read Safety Precautions on page 5. Ordering Information Appearance Sensing distance Output specifications Model Output configuration Shielded 2 mm DC 3-wire models AC 2-wire models NPN PNP NO TL-T2E1 TL-T2F1 TL-T2Y1 NC TL-T2E2 --TL-T2Y2 Unshielded 5 mm DC 3-wire models NPN AC 2-wire models TL-T5ME1 TL-T5MY1 TL-T5ME2 TL-T5MY2 Note: Models with a different frequency are available. The model numbers are TL-T@@@5. (e.g., TL-T2E15). http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Rights Reserved. 1 Ratings and Specifications TL-T Item Model TL-T2E1 TL-T2E2 TL-T2F1 TL-T2Y1 TL-T2Y2 TL-T5ME1 TL-T5ME2 TL-T5MY1 TL-T5MY2 Sensing distance 2 mm±10% 5 mm±10% Setting distance 0 to 1.6 mm 0 to 4 mm Differential travel 10% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 3.) Standard sensing object Iron 12 × 12 × 1 mm Iron 15 × 15 × 1 mm Response frequency E and F models: 800 Hz, Y models: 20 Hz E models: 250 Hz, Y models: 20 Hz Supply voltage E and F models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 20% max. (operating voltage range) Y models: 100 to 220 VAC (90 to 250 VAC) 50/60 Hz Current consumption E and F models: 15 mA max. at 24 VDC Leakage current Y models: 2.5 mA max. at 200 VAC Switching Control capacity E and F models: 100 mA max. at 12 VDC, 200 mA max. at 24 VDC Y models: 10 to 200 mA output Residual E and F models: 1.0 V max. with a load current of 100 mA and cord length of 2 m voltage Y models: Refer to Residual Voltage (Typical) on page 3. Indicators Detection indicator (red) E1 models: NO Operation mode E2 models: NC (with sensing object ap- F1 models: NO Refer to I/O Circuit Diagrams Timing Chart on page 4. proaching) Y1 models: NO Y2 models: NC Circuit protection E models: Reverse connection protection and surge absorber Y models: Surge absorber Ambient temperature Operating/Storage: −25°C to 70°C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Temperature influence ±10% max. of sensing distance at 23% in the temperature range of −25 to 70°C Voltage influence E and F models: ±2.5% max. of sensing distance within a range of ±15% of the rated power supply voltage Y models: ±2.5% max. of sensing distance within a range of ±10% of the rated power supply voltage Insulation resistance 50 MΩ min. (at 500 VDC) between case and current-carrying parts Dielectric strength E and F models: 1,000 VAC, 50/60 Hz for 1 min between case and current-carrying parts Y models: 2,000 VAC, 50/60 Hz for 1 min between case and current-carrying parts Vibration resistance (destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance (destruction) 500 m/s2 for 10 times each in X, Y, and Z directions Degree of protection IEC IP67, in-house standard for oil-resistance Connection method Pre-wired Models (Standard cable length: 2 m) Weight (packed state) Approx. 70 g Case Material Heat-resistant ABS resin Sensing surface Accessories Instruction sheet http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Rights Reserved. 2 Engineering Data (Typical) TL-T Distance X (mm) Operating Range TL-T2@/T5@ 6 5 4Y X 3 TL-T5M 2 TL-T2 1 0 −8 −6 −4 −2 0 2 4 Sensing Head 68 Distance Y (mm) Distance X (mm) Sensing Object Size and Material Influence TL-T2 TL-T5M Distance X (mm) 6 Iron 2 1.8 5 1.6 Stainless steel (SUS304) 4 1.4 1.2 @d t = 1 mm X 3 1 Brass 2 0.8 Aluminum 0.6 1 0.4 Iron Stainless steel (SUS304) Brass @d Aluminum t = 1 mm X 0 5 10 15 20 25 Side length of sensing object: d (mm) 0 5 10 15 20 25 30 35 40 Side length of sensing object: d (mm) Residual Voltage (Typical) TL-T@(M)Y@ at 100 VAC TL-T@(M)Y@ at 200 VAC Leakage Current (Typical) TL-T@Y Leakage current (mA) Load voltage VL (V) Load voltage VL (V) Residual output voltage 100 V ON 50 100 VAC A Residual load voltage 05 10 OFF 50 100 150 200 Load current (mA) Residual output voltage 200 ON 50 Residual load voltage 05 10 V 200 VAC A OFF 50 100 150 200 Load current (mA) R 6A AC power 5 supply 4 3 2 1 0 90 100 150 200 250 Supply voltage (V) http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Rights Reserved. 3 I/O Circuit Diagrams DC 3-wire Models Operation Output mode specifications Models TL-T2E1 NO TL-T5ME1 NPN TL-T2E2 NC TL-T5ME2 Timing charts Sensing object Present Not present Load (between brown and black) Operate Reset Output voltage (between black and blue) Detection indicator (red) H L ON OFF Sensing object Present Not present Load (between brown and black) Operate Reset Output voltage (between black and blue) Detection indicator (red) H L ON OFF NO PNP TL-T2F1 Sensing object .


TL-T2F1 TL-T2Y1 TL-T5ME1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)