DatasheetsPDF.com

T90S5D42-18 Dataheets PDF



Part Number T90S5D42-18
Manufacturers TE
Logo TE
Description 30A PCB Relay
Datasheet T90S5D42-18 DatasheetT90S5D42-18 Datasheet (PDF)

General Purpose High Power PCB Relays T90 Series, 30A PCB Relay n 30A, 1 form A (NO); 20A, 1 form C (CO) n Available as open frame or sealed construction n Meets UL 508 and 873 Spacing - 3.18 through air, 6.36 over surface n UL class F insulation system standard Potter & Brumfield Typical applications HVAC, Appliances, Industrial Controls. Approvals UL E22575; CSA LR15734 Technical data of approved types on request. Contact Data Contact arrangement 1 form A (NO), 1 form B (NC), 1 form.

  T90S5D42-18   T90S5D42-18


Document
General Purpose High Power PCB Relays T90 Series, 30A PCB Relay n 30A, 1 form A (NO); 20A, 1 form C (CO) n Available as open frame or sealed construction n Meets UL 508 and 873 Spacing - 3.18 through air, 6.36 over surface n UL class F insulation system standard Potter & Brumfield Typical applications HVAC, Appliances, Industrial Controls. Approvals UL E22575; CSA LR15734 Technical data of approved types on request. Contact Data Contact arrangement 1 form A (NO), 1 form B (NC), 1 form C (CO) Rated voltage 277VAC Max. switching voltage 277VAC Rated current 30A Limiting continuous current 30A Limiting making current 30A Limiting breaking current 30A Contact material AgCdO Min. recommended contact load 1A, 5VDC or 12VAC Initial contact resistance 75 mΩ at 1A at 5VDC or 12VAC Frequency of operation, with load 360hr Operate/release time max., including bounce 15/15ms Contact ratings Type Load Cycles Typical AgCdO, open style relay NO 30A, 240VAC, general purpose 100x103 NO 20A, 240VAC, resistive heater 100x103 CO 20A/10A, 240VAC, general purpose 100x103 CO 20A/10A, 28VDC, resistive 100x103 UL 508/873 AgCdO NO 30A, 240VAC, general purpose 100x103 NC 15A, 240VAC, general purpose 100x103 CO 20A/10A, 240VAC, general purpose 100x103 NO 20A, 240VAC, resistive 100x103 NC 15A, 240VAC, resistive 100x103 CO 20A/10A, 240VAC, resistive 100x103 NO 80LRA/30FLA, 240VAC 30x103 NC 30LRA/10FLA, 240VAC 30x103 CO 53.6LRA/20FLA / 20LRA/6.7FLA, 240VAC 100x103 NO 98LRA/22FLA, 120VAC 100x103 NO 2HP, 240VAC 1x103 NC 1/2HP, 240VAC 1x103 NO 1HP, 120VAC 1x103 NC 1/4HP, 120VAC 1x103 NO 6A, 277VAC, ballast 100x103 NC 3A, 277VAC, ballast 6x103 NO TV5, 240VAC, tungsten 6x103 NC TV3, 240VAC, tungsten 6x103 NO 20A, 28VDC, resistive 100x103 NC 10A, 28VDC, resistive 100x103 All ratings at 25°C (unless otherwise noted) with relay properly vented. Remove vent nib from enclosed relays after soldering and cleaning for optimum life. Mechanical endurance 10x106 ops. 02-2014, Rev. 0214 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil Data Coil voltage range Max. coil power Max. coil temperature Coil insulation system according UL 5 to 110VDC 1.0W 155°C Class F Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% wW 5 5 3.75 0.5 27 900 6 6 4.5 0.6 40 900 9 9 6.75 0.9 97 900 12 12 9 1.2 155 900 18 18 13.5 1.8 380 900 24 24 18 2.4 660 900 48 48 36 4.8 2560 900 110 110 82.5 11 13450 900 All figures are given for coil without preenergization, at ambient temperature +23°C. Ambient temperature vs. coil voltage – 1W coil Coil Temp. Rise Above Ambient (°C) 130 120 Open Style Relay, No Dust Cover 110 100 90 80 70 60 30A Load 50 25A Load 40 20A Load 30 15A Load 10A Load 20500A Load 75 100 125 150 175 200 Applied Continuous Coil Voltage (% of Rated Voltage) 150 140 Wash Tight Relay, Vented 225 Coil Temp. Rise Above Ambient (°C) 130 120 110 100 90 80 70 30A Load 60 25A Load 50 40 20A Load 15A Load 30 10A Load 0A Load 2050 75 100 125 150 175 200 Applied Continuous Coil Voltage (% of Rated Voltage) 225 Data graphed above are average values and should be verified in application. Tests were conducted within a 2’ (.6m) cube (still air); at nominal coil power @ 25°C; with normally open contact loaded; and with 4’ (1.22m) long, #10AWG load wires. P.C. board relays were mounted to a 30A, single side P.C. board. Coil rise test conducted with a 30A PC board to maintain 20°C max. rise at 30°C. The relay connections and wiring must be designed with an adequate cross section to ensure proper current flow and heat dissipation. After cleaning process knock-off nib should be removed for optimum life of wash-tight relays. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose High Power PCB Relays T90 Series, 30A PCB Relay (Continued) Potter & Brumfield Insulation Data Initial dielectric strength between open contacts between contact and coil Initial insulation resistance between insulated elements Clearance/creepage between contact and coil 11550000VVrrmmss 1x109Ω 3.17mm Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature DC coil -55ºC to 85ºC 1) Category of environmental.


T90S5D42-12 T90S5D42-18 T90S5D42-24


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)