PCB Relays
PCB Relays Single Relays
VKP (Open – Sealed)
Catalog 1308028-2
Revised 6-2009
VKP to be discontinued by end of 2009
F...
Description
PCB Relays Single Relays
VKP (Open – Sealed)
Catalog 1308028-2
Revised 6-2009
VKP to be discontinued by end of 2009
Features
– Limiting continuous current 32 A at 85°C
– Wide voltage range
Typical Applications
– ABS control – Blower fans – Car alarm – Cooling fan – Engine control – Fuel pump – Hazard warning signal – Heated front screen – Heated rear screen – Ignition – Lamps front, rear, fog light – Interior lights – Main switch/supply relay – Seat control – Seatbelt pretensioner – Sun roof – Turn signal – Valves – Window lifter – Wiper control
Please contact Tyco Electronics for relay application support.
Design
– ELV compliant – Open: flux tight type – Sealed: washable type
Weight
– Approx. 19 g (0.67 oz.) open version
– Approx. 22 g (0.77 oz.) sealed version
Nominal Voltage
12 V or 24 V
Terminals
PCB terminals, for assembly on printed circuit boards
VKP_3d01
Conditions
All parametric, environmental and endurance tests are performed according to EIA Standard RS-407-A at standard test conditions unless otherwise noted: 23°C ambient temperature, 20 - 50% RH, 998.9 ±33.9 hPa.
For general storage and processing recommendations please refer to our Application Notes and especially to Storage in the “Glossary” page 23 or at http://relays.tycoelectronics.com/ appnotes/
Disclaimer
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of the relay for your intended pu...
Similar Datasheet