IR Sensor
End of Life May-2023 - Alternative Device: TSMP91100
www.vishay.com
TSMP1138
Vishay Semiconductors
IR Sensor Module f...
Description
End of Life May-2023 - Alternative Device: TSMP91100
www.vishay.com
TSMP1138
Vishay Semiconductors
IR Sensor Module for Remote Control Systems
948691
LINKS TO ADDITIONAL RESOURCES
Product Page
3D 3D
3D Models
Marking
Packages
Holders
FEATURES Photo detector and preamplifier in one package AC coupled response from 30 kHz to 60 kHz, all
data formats If the IR signal strength is more then 500 mW/m2
(distance less than 0.5 m with a typical IR remote control), the frequency range is limited to 55 kHz Improved shielding against electrical field disturbance AGC to suppress ambient noise High sensitivity, long receiving range Supply voltage: 2.5 V to 5.5 V Carrier out signal for IR repeater applications Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Bends and Cuts
DESCRIPTION The TSMP1138 is a miniaturized sensor for receiving the modulated signal of infrared remote control systems. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for repeater applications and code learning applications. This component has not been qualified according to automotive specifications.
MECHANICAL DATA Pinning: 1 = GND, 2 = carrier OUT, 3 = VS
ORDERING CODE TSMP1138 - 1000 pieces in tubes
BLOCK DIAGRAM
16833_11
33 kΩ
Input
AGC
Band pass
Comparator
PIN
Control circuit
3 VS
2 OUT
1 GND
APPLICATION CIRCUIT
TSMPxxxx...
Similar Datasheet