Inductive linear position sensor LI200P0-Q25LM0-ESG25X3-H1181
Type code Ident no.
Measuring range [A…B] Resolution Blind zone a Blind zone b Reproducibility Linearity deviation Temperature drift Ambient temperature
Operating voltage Residual ripple No-load current I0 Rated insulation voltage Short-circuit protection Wire breakage / Reverse polarity protection Output function Process data area Diagnostic bits
Sample rate
Construction Dimensions Housing material Material active area Connection Vibration resistance Shock resistance IP Rating MTTF
Power-on indication Measuring range display
s Rectangular, aluminium / plastic s Versatile mounting possibilities s Measuring range indicated via LED s Immune to electromagnetic interfer-
ences. s Extremely short blind zones s Resolution 0,001 mm s 15…30 VDC s Male M12 x 1, 8-pin s SSI output s 25 bit, Gray-coded s SSI clock rate: 62.5 kHz … 1 MHz
LI200P0-Q25LM0-ESG25X3-H1181 1590010
Wiring diagram
200mm 0,001 mm 29 mm 29 mm ð 10 µm ð 0.1 % f.s. ð ± 0.0001 % / K -25…+70 °C
15…30VDC ð 10 % Uss ð 50 mA ð 0.5 kV yes yes/ yes (voltage supply) 8-pin, SSi, 25 Bit, Gray coded Bit 0 … Bit 19 Bit 21: Positioning element left the measuring range and is outside the detectable area. Bit 22: Positioning element is in the measuring range, lower signal quality (e.g. distance too large) Bit 23: Positioning element is outside the measuring range 1000 Hz
Functional principle
The measuring principle of linear position sensors is based on RLC coupling between the positioning element and the sensor, whereby an output signal is provided proportional to the position of the positioning element. The rugged sensors are wear and tear-free, thanks to the contactless operating principle. They convince through their excellent repeatability, resolution and linearity within a broad temperature range. The innovative technology ensures a high immunity to electromagnetic DC and AC fields.
rectangular, Q25L 258 x 35 x 25 mm aluminium, anodized plastic, PA male, M12 x 1 55 Hz (1 mm) 30 g (11 ms) IP67 138 years acc. to SN 29500 (Ed. 99) 40 °C
LED green multifunction LED, green, yellow, yellow flashing
Edition • 2015-03-20T04:02:47+01:00
1 / 5 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ
[email protected] ñ www.turck.com
Inductive linear position sensor LI200P0-Q25LM0-ESG25X3-H1181
Mounting instructions / Description
Extensive mounting accessories provide various options for installation. The measuring principle of RLC coupling makes the sensor immune to magnetized metal splinters and other interference fields.
LED indications green positioning element is in the measuring range yellow positioning element is in the measuring range, the distance is too large. This is indicated by a weaker signal, see status bit 22 yellow flashing positioning element is outside the coverage, see status bit 23 off positioning element is outside the programmed area (only with teachable versions)
Edition • 2015-03-20T04:02:47+01:00
2 / 5 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ
[email protected] ñ www.turck.com
Inductive linear position sensor LI200P0-Q25LM0-ESG25X3-H1181
Accessories
Type code P1-Li-Q25L
Ident no. 6901041
Description
Guided positioning element for Li-Q25L, inserted in the sensor guide.
Design
P2-Li-Q25L
6901042
Floating positioning element for Li-Q25L; The nominal distance to the sensor is 1.5m; Pairing with the linear position sensor at a distance of up to 5 mm; Misalignment tolerance of up to 4 mm.
P3-Li-Q25L
6901044
Floating positioning element for Li-Q25L; Operational at an offset of 90°; Nominal distance to sensor 1.5mm; Pairing with linear position sensor at a distance of up to 5 mm; misalignment tolerance of up to 4 mm.
P6-Li-Q25L
6901069
Floating positioning element for Li-Q25L; The nominal distance to the sensor is 1.5mm; Pairing with the linear position sensor at a distance of up to 5 mm; Misalignment tolerance of up to 4 mm.
P7-Li-Q25L
6901087
Guided positioning element for Li-Q25L without ball joint
Edition • 2015-03-20T04:02:47+01:00
3 / 5 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ
[email protected] ñ www.turck.com
Inductive linear position sensor LI200P0-Q25LM0-ESG25X3-H1181
Accessories
Type code M1-Q25L
Ident no. 6901045
Description
Mounting foot for linear position sensor Q25L; aluminium; 2 pcs. per bag
Design
M2-Q25L
6901046
Mounting foot for linear position sensor Q25L; aluminium; 2 pcs. per bag
M4-Q25L
6901048
Mounting bracket for linear position sensor Q25L; material Stainless steel; 2 pcs. per bag
MN-M4-Q25
6901025
Sliding block with M4 thread for the backside profile of the Q25L; material Brass; 10 pcs. per bag
AB-M5
6901057
Axial joint for Li-Q25L specific guided positioning elements
Edition • 2015-03-20T04:02:47+01:00
4 / 5 Hans Turck.