AT30TS75

NOT RECOMMENDED FOR NEW DESIGNS Replaced by AT30TS74 and AT30TS75A AT30TS75 9- to 12-bit Selectable, ±0.5°C Accurate Digital Temperature Sensor DATASHEET See Applicable Errata in Section 12. Features  Single 2.7V – 5.5V supply  Measures temperature from -55C to +125C  Highly accurate temperature measurements requiring no external components  ±1.0°C accuracy (typical) over the -5C to +90C range  ±2.0°C accuracy (typical) over the -20C to +125C range  ±3.0°C accuracy (typical) over the -40C to +125C range  User-configurable resolution  9 to 12 bits (0.5C to 0.0625C)  User-configurable high and low temperature limits  ALERT output pin for indicating temperature alarms  2-wire I2C and SMBus™ compatible serial interface  Supports SMBus Timeout  Supports SMBus Alert and Alert Response Address (ARA)  Selectable addressing allows up to eight devices on the same bus  I2C High-Speed (HS) mode compatible  3.4MHz maximum clock frequency  Built-in noise suppression filtering for clock and data input signals  Low power dissipation  75μA active current (typical) during temperature measurements  Shutdown mode to minimize power consumption  1μA shutdown current (typical)  One-shot mode for single temperature measurement while in Shutdown mode  Pin and software compatible to industry-standard LM75-type devices  Industry standard green (Pb/Halide-free/RoHS compliant) package options  8-lead SOIC (150-mil)  8-lead MSOP (3 x 3mm)  8-pad Ultra Thin DFN (UDFN -...