DatasheetsPDF.com

MB95F263K Dataheets PDF



Part Number MB95F263K
Manufacturers Fujitsu Media Devices
Logo Fujitsu Media Devices
Description 8-bit Microcontrollers
Datasheet MB95F263K DatasheetMB95F263K Datasheet (PDF)

FUJITSU MICROELECTRONICS DATA SHEET DS07–12627–1E 8-bit Microcontrollers CMOS F2MC-8FX MB95260H/270H/280H Series MB95F262H/F262K/F263H/F263K/F264H/F264K MB95F272H/F272K/F273H/F273K/F274H/F274K MB95F282H/F282K/F283H/F283K/F284H/F284K ■ DESCRIPTION MB95260H/270H/280H are series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers of these series contain a variety of peripheral resources. Note: F2MC is the abbreviation of FUJITSU Flexibl.

  MB95F263K   MB95F263K


Document
FUJITSU MICROELECTRONICS DATA SHEET DS07–12627–1E 8-bit Microcontrollers CMOS F2MC-8FX MB95260H/270H/280H Series MB95F262H/F262K/F263H/F263K/F264H/F264K MB95F272H/F272K/F273H/F273K/F274H/F274K MB95F282H/F282K/F283H/F283K/F284H/F284K ■ DESCRIPTION MB95260H/270H/280H are series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers of these series contain a variety of peripheral resources. Note: F2MC is the abbreviation of FUJITSU Flexible Microcontroller. ■ FEATURES • F2MC-8FX CPU core Instruction set optimized for controllers • Multiplication and division instructions • 16-bit arithmetic operations • Bit test branch instructions • Bit manipulation instructions, etc. • Clock (main OSC clock and sub-OSC clock are only available in MB95F262H/F262K/F263H/F263K/F264H/ F264K/F282H/F282K/F283H/F283K/F284H/F284K) • Selectable main clock source Main OSC clock (up to 16.25 MHz, maximum machine clock frequency: 8.125 MHz) External clock (up to 32.5 MHz, maximum machine clock frequency: 16.25 MHz) Main internal CR clock (1/8/10 MHz ±3%, maximum machine clock frequency: 10 MHz) • Selectable subclock source Sub-OSC clock (32.768 kHz) External clock (32.768 kHz) Sub-internal CR clock (Typ: 100 kHz, Min: 50 kHz, Max: 200 kHz) • Timer • 8/16-bit composite timer • Timebase timer • Watch prescaler • LIN-UART (MB95F262H/F262K/F263H/F263K/F264H/F264K/F282H/F282K/F283H/F283K/F284H/F284K) • Full duplex double buffer • Capable of clock-synchronized serial data transfer and clock-asynchronized serial data transfer (Continued) Copyright©2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved 2008.12 MB95260H/270H/280H Series (Continued) • External interrupt • Interrupt by edge detection (rising edge, falling edge, and both edges can be selected) • Can be used to wake up the device from different low power consumption (standby) modes • 8/10-bit A/D converter • 8-bit or 10-bit resolution can be selected. • Low power consumption (standby) modes • Stop mode • Sleep mode • Watch mode • Timebase timer mode • I/O port (Max: 17) (MB95F262K/F263K/F264K) • General-purpose I/O ports (Max): CMOS I/O: 15, N-ch open drain: 2 • I/O port (Max: 16) (MB95F262H/F263H/F264H) • General-purpose I/O ports (Max): CMOS I/O: 15, N-ch open drain: 1 • I/O port (Max: 5) (MB95F272K/F273K/F274K) • General-purpose I/O ports (Max): CMOS I/O: 3, N-ch open drain: 2 • I/O port (Max: 4) (MB95F272H/F273H/F274H) • General-purpose I/O ports (Max): CMOS I/O: 3, N-ch open drain: 1 • I/O port (Max: 13) (MB95F282K/F283K/F284K) • General-purpose I/O ports (Max): CMOS I/O: 11, N-ch open drain: 2 • I/O port (Max: 12) (MB95F282H/F283H/F284H) • General-purpose I/O ports (Max): CMOS I/O: 11, N-ch open drain: 1 • On-chip debug • 1-wire serial control • Serial writing supported (asynchronous mode) • Hardware/software watchdog timer • Built-in hardware watchdog timer • Low-voltage detection reset circuit • Built-in low-voltage detector • Clock supervisor counter • Built-in clock supervisor counter function • Programmable port input voltage level • CMOS input level / hysteresis input level • Dual operation Flash memory • The erase/write operation and the read operation can be executed in different banks (upper bank/lower bank) simultaneously. • Flash memory security function • Protects the content of the Flash memory 2 DS07–12627–1E MB95260H/270H/280H Series ■ PRODUCT LINE-UP • MB95260H Series Part number MB95F262H MB95F263H MB95F264H MB95F262K MB95F263K MB95F264K Parameter Type Flash memory product Clock supervisor counter It supervises the main clock oscillation. Program ROM capacity 8 Kbytes 12 Kbytes 20 Kbytes 8 Kbytes 12 Kbytes 20 Kbytes RAM capacity 240 bytes 496 bytes 496 bytes 240 bytes 496 bytes 496 bytes Low-voltage detection reset No Yes Reset input Dedicated Selected by software Number of basic instructions : 136 Instruction bit length : 8 bits CPU functions Instruction length Data bit length : 1 to 3 bytes : 1, 8 and 16 bits Minimum instruction execution time : 61.5 ns (with machine clock = 16.25 MHz) Interrupt processing time : 0.6 µs (with machine clock = 16.25 MHz) Generalpurpose I/O I/O ports (Max): 16 CMOS: 15 N-ch: 1 I/O ports (Max): 17 CMOS: 15 N-ch: 2 Timebase timer Interrupt cycle : 0.256 ms to 8.3 s (when external clock = 4 MHz) Hardware/ Reset generation cycle software Main oscillation clock at 10 MHz: 105 ms (Min) watchdog timer The sub-internal CR clock can be used as the source clock of the hardware watchdog timer. Wild register It can be used to replace three bytes of data. LIN-UART A wide range of communication speed can be selected by a dedicated reload timer. It has a full duplex double buffer. Clock-synchronized serial data transfer and clock-asynchronized serial data transfer is enabled. The LIN function can be used as a LIN master or a LIN slave. 8/10-bit A/D 6 channels converter 8-bit or 10-bit resolution can be selected. 8/16-bit composite tim.


MB95F263H MB95F263K MB95F264H


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)