LDTA123EET1

LESHAN RADIO COMPANY, LTD. Bias Resistor Transistors PNP Silicon Surface Mount Transistors With Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SC-89 package which is designed for low power surface mount applications. ƽSimplifies Circuit Design ƽReduces Board Space ƽReduces Component Count ƽThe SC-89 Package can be Soldered using Wave or Reflow. ƽAvailable in 8 mm, 7inch/3000 Unit Tape & Reel ƽThis is Pb-Free Device. DEVICE MARKING AND ORDERING INFORMATION Device Marking Package Shipping LDTA123EET1G 6H SC-89 (Pb-Free) 3000/Tape&Reel MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Unit Collector-Base Voltage VCBO 50 Vdc Collector-Emitter Voltage VCEO 50 Vdc Collector Current IC 100 mAdc THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation TA = 25°C Derate above 25°C Thermal Resistance – Junction-to-Ambient PD RθJA 200 (Note 1) 300 (Note 2) 1.6 (Note 1) 2.4 (Note 2) 400 (Note 2) mW mW/°C °C/W Junction and Storage Temperature Range TJ, Tstg –5...