OPB750T

Product Bulletin OPB750T JJaunnuear1y9290606 Reflective Object Sensor Type OPB750T Features High contrast ratio, 1000 to 1 minimum Printed circuit board mount Low cost plastic housing Description The OPB750T reflective assembly features a phototransistor output designed to decrease low-level light gain while not affecting the high-level light gain. Available without mounting tabs as OPB750N. Available with 12", 26 AWG wire leads as OPB750/OPB755 series. Photologic® output sensors available in OPB760/OPB770 series. RoHS Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . -40o C to +85o C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(2) Input Diode Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Peak Forward Current (1µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . . 3.0 A Reverse DC Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1) Output Phototransistor Collector-Emitter Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....