Document
ADNS-5110-001 Trim Lens for LED Mouse
Data Sheet
Description
The ADNS-5110-001 trim lens is designed for use with Avago Technologies ADNS-5xxx series of LED mouse sensors. Together with the HLMP-EG3E-xxxxx LED and the sensor, the ADNS-5110-001 trim lens completes the optical navigation system to provide the directed illumination for the optical imaging process necessary for the operation of the optical sensor. The ADNS-5110-001 lens is a precision molded optical component and should be handled with care to avoid scratching and contamination of the optical surfaces.
Lens ID
30.00
A 1.181
A
WXYZ
16.00 0.630
01
11.69 0.460
Cavity No.
Lens Revision
13.22 0.520
Lens surface 3 Lens surface 4
Lens surface 1
Logo
4.48 0.176
1.28
0.050 0.97 0.038
Notes: 1. Dimensions in millimeters/inches 2. Dimensional tolerance: ±0.1mm 3. Angular tolerance: ±3° 4. Maximum flash: +0.20mm 5. () reference dimension
Figure1. ADNS-5110-001 trim lens outline drawings and details
10.05 0.396
Detail B
Lens surface 5
Lens surface 6 Lens surface 2
Section A - A
4.18 at tip 0.165
Detail - B Scale 5:1
Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram
Parameters
Distance from Object Surface to Lens Reference Plane
Distance from Object Surface to Sensor Reference Plane
Symbol A
B
Min 2.30
6.77
Typical 2.40
6.87
Max Unit 2.50 mm
6.97 mm
Conditions
Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements.
Parameters Magnification Design Wavelength Object to Image Distance Lens Material Index of Refraction Optical Depth of Field Field Coverage Radius
Symbol
N DOF
Min 0.72
8.34 1.580
Typical 0.8 639 8.84 1.582 0.3 0.6
Max 0.88
9.34 1.584
Unit
nm mm
mm mm
Conditions At nominal plane. Design value
At 639nm
Design value
* Lens material is polycarbonate or Polystyrene HH30. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation.
Sensor Lens
A
B
2.40 0.094
6.87 0.271
Surface Lens Reference Plane
Note: A – Distance from object surface to lens reference plane B – Distance from object surface to sensor reference plane Figure 2. Distance from lens reference plane to tracking surface (Z)
2
Mounting Illustration for the ADNS-5110-001 LED Mouse Trim Lens
The STEP or IGES format drawing file with design specifications for the LED mouse base plate features and lens are available. These features are useful in maintaining proper positioning and alignment of the ADNS-5110-001 trim lens in the optical system assembly of the mouse. These file can be obtained by downloading from Avago Technologies website or by contacting your local Avago Technologies sales representative.
LED LED Clip Sensor Customer supplied PCB ADNS-5110-001
Customer supplied base plate with recommended alignment features per IGES drawing
Figure 3. Exploded View of the Optical System Assembly and Mounting
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-1886EN - August 16, 2011
.