Platinum Resistance Temperature Detector
Platinum Resistance Temperature Detector
PCB 1325 (0805)
This platinum temperature sensor on a printed circuit board h...
Description
Platinum Resistance Temperature Detector
PCB 1325 (0805)
This platinum temperature sensor on a printed circuit board has been specially designed for use in calorimetry. When designing these sensors, the stringent requirements of this sector with regard to precision, long-term stability, cost minimisation as well as the option for fully automatic further processing were of prime concern. The temperature sensor in an SMD model forms the measurement active element on a PCB. The chip is connected with terminal faces with a thin conductive path in order to reduce heat dissipation and to prevent corruption of the measuring results. As a cable set sensor, it is suitable for a wide range of applications within a temperature range of 0°C to 150°C.
Nominal Resistance R0
Tolerance DIN EN 60751
1996-07
Tolerance DIN EN 60751
2009-05
1000
B F 0.3
Ordner No. 30 201 102
Dimensions in mm
L1 L2
B
+1 -2
-0,2
13 15
2,5
FC Type 0805
500
B
F 0.3
30 201 103
13
15
2,5 0805
Specification Tolerance classes Temperature range Temperature coefficient Long-term stability
Measuring current
Self-heating Temperature change resistance Contact Soldering
Ambient conditions Response time
Packaging Storage life Note
DIN EN 60751
Class B
0°C to 150°C
TC = 3850 ppm/K
≤ 0.1 K after 1000 h at 150°C energized with: Pt 1000: 0.3 mA Pt 500: 0.7 mA
1000Ω: 0.1 to 0.3mA 500Ω: 0.1 to 0.7mA
0.15 K/mW in ice water
≤ 0.1 K after 1000 change 0°C/150°C in air
Cu connection pad with chem. Sn surf...
Similar Datasheet