DW2-48S12

SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. DW2-5 SERIES DC-DC CONVERTER www.DataSheet4U.com z RATED 2-5W OUTPUT z HIGH POWER DENSITY z SINGLE&DUAL OUTPUT z INDUSTRIAL STANDARD PIN-OUT z NO HEAT SINK REQUIRED z 1K VDC ISOLATION z WIDE INPUT： 2：1 z REGULATED OUTPUT z PCB MOUNTING z OVER CURRENT&SHORT CIRCUIT PROTECTION The DW2-5 series DC-DC converter offers 2-5 watts regulated power from a 24 PIN international standard DIP package. The series are especially designed for the application of telecommunication, industry control, instrumentation and measurements. With its features, the product can be used where the wider input, regulated output and isolation needed. ELECTRICAL SPECIFICATIONS All specifications tested typically @ 25°C, humidity<75%, nominal input and rated output unless otherwise noted. OUTPUT SPECIFICATIONS Items: Testing condition Output accuracy: At full load and nominal Vin Output power: Full load Line regulation: Input voltage from low to high Load regulation: Single Vout From 10% to full load Dual Vout Ripple and noise: 20MHz bandwidth Temperature drift Minimum load Switching frequency Over load protection % of FL at nominal input Short circuit protection Min Typ 10% 2W-5W 400KHz 120 Continuous and automatic recovery Max ±2% full load120% 0.5% 0.5% 2% 50mVp-p 0.03 %/°C 10% INPUT SPECIFICATIONS Items: Testing condition 5VDC Input voltage range 12VDC 24VDC 48VDC Input filter Start-up time Nominal Vin and certain load Min Pi Typ 4.5-9VD...