2W Stereo Audio Amplifier
Global Mixed-mode Technology Inc.
2W Stereo Audio Amplifier
6dB\10dB\15.6dB\21.6dB Selectable Gain Settings
G1427
Feat...
Description
Global Mixed-mode Technology Inc.
2W Stereo Audio Amplifier
6dB\10dB\15.6dB\21.6dB Selectable Gain Settings
G1427
Features
Internal Gain Control, Which Eliminates External Gain-Setting Resistors
Depop Circuitry Integrated Output Power at 1% THD+N, VDD=5V
--2.0W/CH (typical) into a 4Ω Load --1.2W/CH (typical) into a 8Ω Load Bridge-Tied Load (BTL), Single-Ended (SE) www.DataSheet4U.Scotmereo Input MUX PC-Beep Input Fully differential Input Shutdown Control Available Surface-Mount Power Package 24-Pin TSSOP-P
Applications
Stereo Power Amplifiers for Notebooks or Desktop Computers
Multimedia Monitors Stereo Power Amplifiers for Portable Audio
Systems
General Description
G1427 is a stereo audio power amplifier in 24pin TSSOP thermal pad package. It can drive 2.0W continuous RMS power into 4Ω load per channel in Bridge-Tied Load (BTL) mode at 5V supply voltage. Its THD is smaller than 1% under the above operation condition. To simplify the audio system design in the notebook application, G1427 supports the Bridge-Tied Load (BTL) mode for driving the speakers, Single-End (SE) mode for driving the headphone. For the low current consumption applications, the SHDN mode is supported to disable G1427 when it is idle. The current consumption can be reduced to 160µA (typically).
Amplifier gain is internally configured and controlled by two terminals (GAIN0, GAIN1). BTL gain settings of 6dB, 10dB, 15.6dB, 21.6dB are provided, while SE gain is always configured as 4...
Similar Datasheet