Document
THT CURRENT SENSE TRANSFORMERS & INDUCTORS
DVE VDE Approved Designed for switching power supply applications Transformer meets IEC950 insulation requirements Frequency range from 20kHz to 200kHz
Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C
Part Number Transformer
with 2-1 T Primaries
Schem. Figure
Part Number Transformer Schem.
with 1T Figure Primary
Part Number Inductor without Primary
Schem. Figure
Turns NS
—
1C PE-63586 1A PE-51686 2A
50
PE-64487 1C PE-63587 1A PE-51687 2A
100
PE-64488 1C PE-63588 1A PE-51688 2A
200
PE-64517 1D — — PE-51717 2B 50CT
PE-64518 1D PE-63618 1B PE-51718 2B 100CT
PE-64519 1D PE-63619 1B PE-51719 2B 200CT
—
— PE-63691 1B
—
— 300CT
NOTES: 1. Maximum ratings specified with rated secondary terminating resistance
and 1 turn primary. 2. Amp-microsecond (AµSec.) rating of primary equals volt microsecond
(VµSec.) rating of secondary when secondary is terminated in rated resistance. (Amp—microseconds is equal to the product of a square pulse of current in amps, times the current pulse width in microseconds. 3. Maximum operating temperature 105°C (ambient plus rise).
Secondary Inductance
MH (MIN)
5.0
20.0
80.0
5.0
20.0
80.0 180.0
Secondary Inductance Test Voltage (15.75 KHz)
0.5
1.0
2.0
0.5
1.0
2.0 3.0
RS (Ω MAX)
0.7 1.40 4.50 0.7 1.40 4.50 11.0
RT (Ω NOM)
50 100 200 50 100 200 300
Primary Unipolar Amp µ Sec. Rating (MAX)
150
300
600
150
300
600 900
Primary Bipolar Amp µ Sec. Rating (MAX)
300
600
1200
300
600
1200 1800
4. When terminated with rated terminating resistance, the inductor scale factor is Vout = 1 volt per amp. for center tapped units terminating resistance for each half of winding is listed value divided by two.
5. 1 turn primary peak sense current is 20 amps for all parts listed above. 6. RoHS compliant parts are being introduced. Please contact Pulse for
RoHS compliant part availability. If available, order part by adding the suffix "NL" to the part number (i.e. PE-63586 becomes PE-63586NL).
Mechanicals
Schematics
Transformer
16
3
PE-XXXXX
DATE CODE
4
27
5
0.900 22,86
MAX
0.700 17,78
MAX
DVE
1441
0.700 17,78
MAX
Inductor
0.390 9,906
MAX
.170 4,32
MIN
0.652 17,01
MAX
0.800 1457 20,32
1A 1B
1 31 3 4
2 52 5
1C 1D
1 31 3 2 24 66 7 57 5
.010 0,25
MIN
4X.10,5310 ±,.007063 (Leads: 1,2,6,7)
.200 5,08
0.700 17,78
.500 12,70
MIN
2X.00,3706 ±,.005012 (Leads: 3,5)
.250 6,35
.500 12,70
For More Information:
.015 0,38
MIN
0.500
12,70
0.500 12,70
1.520,70//1.770,708MAX/MIN
.030 0,76
±
.002 0,05
Solderable
Pin
2A
1
3
Dimensions: Inches mm
Unless otherwise specified, all tolerances are ± .005 0,13
2B
1 2 3
Pulse Worldwide Pulse
Headquarters
Northern Europe
12220 World Trade Drive 3 Huxley Road
San Diego, CA 92128 Surrey Research Park
U.S.A.
Guildford, Surrey GU2 5RE
www.pulseeng.com United Kingdom
TEL: 858 674 8100
TEL: 44 1483 401700
FAX: 858 674 8262
FAX: 44 1483 401701
Pulse Southern Europe Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41
Pulse China Headquarters No. 1 Industrial District Changan, Dongguan China TEL: 86 769 5538070 FAX: 86 769 5538870
Pulse North China Room 1503 XinYin Building No. 888 YiShan Road Shanghai 200233 China TEL: 86 21 54643211/2 FAX: 86 21 54643210
Pulse South Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324
TEL: 65 6287 8998 FAX: 65 6280 0080
Pulse North Asia No. 26 Kao Ching Road Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. TEL: 886 3 4641811 FAX: 886 3 4641911
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2006. Pulse Engineering, Inc. All rights reserved.
www.pulseeng.com
P578.A (3/06)
.