DatasheetsPDF.com

PE-51687 Dataheets PDF



Part Number PE-51687
Manufacturers Pulse
Logo Pulse
Description THT CURRENT SENSE TRANSFORMERS/INDUCTORS
Datasheet PE-51687 DatasheetPE-51687 Datasheet (PDF)

THT CURRENT SENSE TRANSFORMERS & INDUCTORS DVE VDE Approved Designed for switching power supply applications Transformer meets IEC950 insulation requirements Frequency range from 20kHz to 200kHz Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C Part Number Transformer with 2-1 T Primaries Schem. Figure Part Number Transformer Schem. with 1T Figure Primary Part Number Inductor without Primary Schem. Figure Turns NS — 1C PE-63586 1A PE-51686 2A 50 PE-64487 1C PE-6.

  PE-51687   PE-51687



Document
THT CURRENT SENSE TRANSFORMERS & INDUCTORS DVE VDE Approved Designed for switching power supply applications Transformer meets IEC950 insulation requirements Frequency range from 20kHz to 200kHz Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C Part Number Transformer with 2-1 T Primaries Schem. Figure Part Number Transformer Schem. with 1T Figure Primary Part Number Inductor without Primary Schem. Figure Turns NS — 1C PE-63586 1A PE-51686 2A 50 PE-64487 1C PE-63587 1A PE-51687 2A 100 PE-64488 1C PE-63588 1A PE-51688 2A 200 PE-64517 1D — — PE-51717 2B 50CT PE-64518 1D PE-63618 1B PE-51718 2B 100CT PE-64519 1D PE-63619 1B PE-51719 2B 200CT — — PE-63691 1B — — 300CT NOTES: 1. Maximum ratings specified with rated secondary terminating resistance and 1 turn primary. 2. Amp-microsecond (AµSec.) rating of primary equals volt microsecond (VµSec.) rating of secondary when secondary is terminated in rated resistance. (Amp—microseconds is equal to the product of a square pulse of current in amps, times the current pulse width in microseconds. 3. Maximum operating temperature 105°C (ambient plus rise). Secondary Inductance MH (MIN) 5.0 20.0 80.0 5.0 20.0 80.0 180.0 Secondary Inductance Test Voltage (15.75 KHz) 0.5 1.0 2.0 0.5 1.0 2.0 3.0 RS (Ω MAX) 0.7 1.40 4.50 0.7 1.40 4.50 11.0 RT (Ω NOM) 50 100 200 50 100 200 300 Primary Unipolar Amp µ Sec. Rating (MAX) 150 300 600 150 300 600 900 Primary Bipolar Amp µ Sec. Rating (MAX) 300 600 1200 300 600 1200 1800 4. When terminated with rated terminating resistance, the inductor scale factor is Vout = 1 volt per amp. for center tapped units terminating resistance for each half of winding is listed value divided by two. 5. 1 turn primary peak sense current is 20 amps for all parts listed above. 6. RoHS compliant parts are being introduced. Please contact Pulse for RoHS compliant part availability. If available, order part by adding the suffix "NL" to the part number (i.e. PE-63586 becomes PE-63586NL). Mechanicals Schematics Transformer 16 3 PE-XXXXX DATE CODE 4 27 5 0.900 22,86 MAX 0.700 17,78 MAX DVE 1441 0.700 17,78 MAX Inductor 0.390 9,906 MAX .170 4,32 MIN 0.652 17,01 MAX 0.800 1457 20,32 1A 1B 1 31 3 4 2 52 5 1C 1D 1 31 3 2 24 66 7 57 5 .010 0,25 MIN 4X.10,5310 ±,.007063 (Leads: 1,2,6,7) .200 5,08 0.700 17,78 .500 12,70 MIN 2X.00,3706 ±,.005012 (Leads: 3,5) .250 6,35 .500 12,70 For More Information: .015 0,38 MIN 0.500 12,70 0.500 12,70 1.520,70//1.770,708MAX/MIN .030 0,76 ± .002 0,05 Solderable Pin 2A 1 3 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 2B 1 2 3 Pulse Worldwide Pulse Headquarters Northern Europe 12220 World Trade Drive 3 Huxley Road San Diego, CA 92128 Surrey Research Park U.S.A. Guildford, Surrey GU2 5RE www.pulseeng.com United Kingdom TEL: 858 674 8100 TEL: 44 1483 401700 FAX: 858 674 8262 FAX: 44 1483 401701 Pulse Southern Europe Zone Industrielle .


PE-51686 PE-51687 PE-51688


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)