FIBER PIGTAILWDM. FU-632SEA-6M41A Datasheet

FU-632SEA-6M41A Datasheet PDF, Equivalent


Part Number

FU-632SEA-6M41A

Description

1.55 um EAM/DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL(WDM)

Manufacture

Mitsubishi Electric Semiconductor

Total Page 5 Pages
PDF Download
Download FU-632SEA-6M41A Datasheet PDF


FU-632SEA-6M41A Datasheet
MITSUBISHI (OPTICAL DEVICES)
FU-632SEA-3MxxA/FU-632SEA-6MxxA
1.55 mm EAM/DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL(WDM)
DESCRIPTION
Mod ule type FU-632SEA-6MxxA is an electro-
aborption modulator integrated with 1.55mm DFB-LD
module with single mode optical fiber.
Th is module is suitable to a light source in 2.5Gb/s
digital optical communication systems where the
distance is shorter than 640km.
Th is module is pre pared in accordance with ITU-T
reco mmend ation wavelength channel plan for Dense-
WDM transmission.
FEATURES
Input impedance is 50W
Integrated Electroabsorption Modulator(EAM)
Distributed feedback (DFB) Laser Diode
Emission wavelength is the 1.55mm band
Single-mode optical fiber pig-tail
Built-in optical isolator
Built-in thermal electric cooler
Butterfly package
APPLICATION
2.5Gbps,6400ps/nm WDM application
2.5Gbps,12800ps/nm WDM application
ABSOLUTE MAXIMUM RATINGS (Tld=Tset)
Parameter
Laser diode
Optical output power
Forward current
Symbol
Pf
If
Conditions
CW
CW
Rating
6
200
Unit
mW
mA
Modulator
Photodiode
monitoring
Thermoelectric
cooler(Note 1)
Reverse voltage
Reverse voltage
Forward voltage
for Reverse voltage
Forward current
Current
Voltage
Vrl
Vrm
Vfm
Vrd
Ifd
Ipe
Vpe
CW
-
-
-
-
-
-
2V
5V
1V
20 V
2 mA
1.5 A
3V
Operating case temperature
Tc
-
-20 to 70
°C
Storage temperature
Tstg
-
-40 to 85
°C
No te 1. Even if the thermoelectric cooler(TEC) is operated within the rated conditions, uncontrolled current
loading or operation without heat sink may easily damage the module by exceeding the storage
temperature range. Thermistor resistance should be properly monitored by the feedback circuit during
TEC operation to avoid the catastrophic damage.

FU-632SEA-6M41A Datasheet
MITSUBISHI (OPTICAL DEVICES)
FU-632SEA-3MxxA/FU-632SEA-6MxxA
1.55 mm EAM/DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL(WDM)
ELECTRICAL/OPTICAL CHARACTERISTICS (Tld=Tset, Tc=25°C unless otherwise noted)
Parameter
Symbol
Test Conditions
Limits
Unit
Laser operating
Temperature
Threshold current
Operating current
Operating voltage
Input impedance
Optical output power from
fiber end
Light emission central
spectral wavelength
Center wavelength drift with
case temperature
Side mode suppression
ratio
Spectral width
Relative intensity noise
Tset
Ith
Iop
Vop
Zin
Pf
lc
Dlc/DTc
Sr
Dl
RIN
CW, If=Iop
CW,Vm=0V
CW,Vm=0V
CW,Vm=0V,If=Iop
If=Iop
CW,Vm=0V,If=Iop
CW,Vm=0V,If=Iop,
Tld=Tset
CW,Vm=0V,APC
Tld=Tset ,Tc=-20~70°C
(Note3,5)
(Note3,5)
CW,Vm=0V,If=Iop,2.5GHz
Min. Typ. Max.
15 - 35 °C
5 - 30 mA
50 60 100 mA
- - 1.7 V
- 50
-W
1.2 -
- mW
see Table 1.
nm
-1 - 0 pm/°C
35 40
- dB
- 3 10 MHz
- -155 -140 dB/Hz
Power penalty
Pp
(Note4,5) -3MxxA series
-
- 1.0 dB
@6400ps/nm
-6MxxA series
@12800ps/nm
-
- 1.0 dB
Extinction ratio
Rise/Fall time
Ex (Note3,5)
tr/tf (Note3,5),10-90%
11 -
- dB
- - 120 ps
Cutoff frequency
RF return loss
fc If=Iop,Vm=-1V
S11 If=Iop,Vm=-1V,0~2GHz
If=Iop,Vm=-1V,2~3GHz
3.5 -
10 -
7-
- GHz
- dB
- dB
If=Iop,Vm=-1V,3~5GHz
3-
- dB
Tracking error
Er Tc=-20 70°C,APC,
ATC (Note6)
- 0.3 0.5 dB
Monitor current
Imon
CW,If=Iop,Vm=0V
0.05 -
1.0 mA
Dark current(PD)
Id Vrd=5V,Tld=25°C
- - 0.1 mA
Capacitance(PD)
Ct
Vrd=5V,Tld=25°C,f=1MHz
- 10
- pF
Optical isolation
Iso Tc=25°C
35 -
- dB
Tc=-20~70°C
23 -
- dB
Note 2. Vm is EAM bias level at CW condition, Vpp and Voff are EAM amplitude and EAM high level offset
voltage respectively at modulated condition.
3. 2.48832Gb/s,NRZ,PRBS223-1,If=Iop,Vpp=2.5V,Voff=-0.2V,Tld=Tset, Back to back.
4. 2.48832Gb/s,NRZ,PRBS223-1,If=Iop,Vpp=2.5V,Voff=-0.2V,Tld=Tset, dispersion=6400ps/nm
for FU-632SEA-3MxxA series, or dispersion=12800ps/nm for FU-632SEA-6MxxA series.
5. Optical return loss of the connectors should be greater than 40dB in order to get specified performance.
6. Er=MAX|10´log(Pf(Tc)/Pf(25°C))|


Features Datasheet pdf MITSUBISHI (OPTICAL DEVICES) FU-632SEA- 3MxxA/FU-632SEA-6MxxA 1.55 mm EAM/DFB-L D MODULE WITH SINGLEMODE FIBER PIGTAIL( WDM) DESCRIPTION Mod ule type FU-632SEA -6MxxA is an electroaborption modulator integrated with 1.55mm DFB-LD module w ith single mode optical fiber. Th is mo dule is suitable to a light source in 2 .5Gb/s digital optical communication sy stems where the distance is shorter tha n 640km. Th is module is pre pared in a ccordance with ITU-T reco mmend ation w avelength channel plan for DenseWDM tra nsmission. FEATURES Input impedance is 50 W Integrated Electroabsorption Modul ator(EAM) Distributed feedback (DFB) La ser Diode Emission wavelength is the 1. 55mm band Single-mode optical fiber pig -tail Built-in optical isolator Built-i n thermal electric cooler Butterfly pac kage APPLICATION 2.5Gbps,6400ps/nm WDM application 2.5Gbps,12800ps/nm WDM appl ication ABSOLUTE MAXIMUM RATINGS (Tld= Tset) Parameter Laser diode Optical out put power Forward current Reverse voltage Modulator Photodiode .
Keywords FU-632SEA-6M41A, datasheet, pdf, Mitsubishi Electric Semiconductor, 1.55, um, EAM/DFB-LD, MODULE, WITH, SINGLEMODE, FIBER, PIGTAILWDM, U-632SEA-6M41A, -632SEA-6M41A, 632SEA-6M41A, FU-632SEA-6M41, FU-632SEA-6M4, FU-632SEA-6M, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)