AiT Semiconductor Inc.
www.ait-ic.com
A6155
LOW DROPOUT VOLTAGE REGULATOR 150mA DUAL OUTPUT CMOS LOW NOISE
DESCRIPTION...
AiT Semiconductor Inc.
www.ait-ic.com
A6155
LOW DROPOUT VOLTAGE
REGULATOR 150mA DUAL OUTPUT CMOS LOW NOISE
DESCRIPTION
The A6155 is a dual output, low noise; low-dropout
regulator delivers at least 150mA of continuous output current. The output voltage for each
regulator is set independently by trimming. Voltages are selectable in 100mV steps within a range of 1.2V to 5.0V. Typical output noise is 27uVRMS, and PSRR is 65dB at 1KHz.
The A6155 includes two independent logic-controlled shutdown inputs and allows the output of each
regulator to be turned of independently. The A6155 includes high accuracy voltage reference, error amplifier, and current limit circuit and output driver module.
The A6155 has excellent load and line transient response and good temperature characteristics, which can assure the stability of chip and power system and A6155 uses trimming technique to guarantee output voltage accuracy within ±2%.
The A6155 is available in SOT-26 package.
ORDERING INFORMATION
Package Type
Part Number
SOT-26
A6155E6R-XZ E6
A6155E6VR-XZ
X: Output Portfolio
See output voltage portfolio
Note
Z: Pin Type, C or D
V: Green Package
R: Tape & Reel
AiT provides all Pb free products
Suffix “ V “ means Green Package
FEATURES
Low Output Noise (27uVRMS) Standby Mode: 0.1uA 150mA output current for each channel 25uA Operating Supply Current per channel High Ripple Rejection: 65dB@1KHz(Typ.) Low 200mV dropout at 100mA load Excellent Line Regulation: 0.05%/V Built-in chip En...