Document
Ordering number:2017A
PNP/NPN Epitaxial Planar Silicon Transistors
2SB1125/2SD1625
Driver Applications
Applications
· Motor drivers, printer hammer drivers, relay drivers, voltage regulator control.
Features
· High DC current gain. · Large current capacity and wide ASO. · Very small size making it easy to provide high-
density, small-sized hybrid IC’.
Package Dimensions
unit:mm 2038
[2SB1125/2SD1625]
( ) : 2SB1125
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation
Symbol
VCBO VCEO VEBO
IC ICP PC
Junction Temperature Storage Temperature
Tj Tstg
Electrical Characteristics at Ta = 25˚C
Conditions Mounted on ceramic board (250mm2×0.8mm)
Parameter
Collector Cutoff Current Emitter Cutoff Current DC Current Gain
Symbol
Conditions
ICBO IEBO hFE1 hFE2
VCB=(–)40V, IE=0 VEB=(–)8V, IC=0 VCE=(–)2V, IC=(–)50mA VCE=(–)2V, IC=(–)500mA
Gain-Bandwidth Product
fT VCE=(–)5V, IC=(–)50mA
E : Emitter C : Collector B : Base
SANYO : PCP (Bottom view)
Ratings (–)80 (–)50 (–)10 (–)0.7 (–)2 500 1.3 150
–55 to +150
Unit V V V A A
mW W ˚C ˚C
Ratings min typ
5000 4000 (3000)
200 (170)
max (–)100 (–)100
Unit nA nA
MHz MHz
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
92098HA (KT)/4027AT, TS No.2017–1/4
Parameter
Output Capacitance
Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage
2SB1125/2SD1625
Symbol
Conditions
Cob VCB=(–)10V, f=1MHz
VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO
IC=(–)100mA, IB=(–)0.1mA IC=(–)100mA, IB=(–)0.1mA IC=(–)10µA, IE=0 IC=(–)1mA, RBE=∞ IE=(–)10µA, IC=0
Electrical Connection
Ratings min typ
9 (18) (–)0.8 (–)1.3 (–)80 (–)50 (–)10
max
(–)1.2 (–)2.0
Unit
pF pF V V V V V
No.2017–2/4
2SB1125/2SD1625
No.2017–3/4
2SB1125/2SD1625
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any and all SANYO products described or contained herein fall under strategic products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, such products must not be exported without obtaining export license from the Ministry of International Trade and Industry in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for vol.