DatasheetsPDF.com

TQ2SS-L2-6V Dataheets PDF



Part Number TQ2SS-L2-6V
Manufacturers Panasonic
Logo Panasonic
Description SMD RELAYS
Datasheet TQ2SS-L2-6V DatasheetTQ2SS-L2-6V Datasheet (PDF)

TQ SMD TESTING LOW-PROFILE TQ SMD RELAYSSURFACE-MOUNT RELAY 14 .551 9 .354 5.6 .220 mm inch RoHS Directive compatibility information http://www.nais-e.com/ FEATURES • Low-profile: 6 mm .236 inch (Tape height: max. 6.5 mm .256 inch) • Tape and reel package is available as standard packing style • Surge withstand between contacts and coil: 2,500 V • Breakdown voltage between contacts and coil: 1,500 V • Capacity: 2 A • High sensitivity: 2 Form C; 140 mW power consumption (Single side stable ty.

  TQ2SS-L2-6V   TQ2SS-L2-6V


Document
TQ SMD TESTING LOW-PROFILE TQ SMD RELAYSSURFACE-MOUNT RELAY 14 .551 9 .354 5.6 .220 mm inch RoHS Directive compatibility information http://www.nais-e.com/ FEATURES • Low-profile: 6 mm .236 inch (Tape height: max. 6.5 mm .256 inch) • Tape and reel package is available as standard packing style • Surge withstand between contacts and coil: 2,500 V • Breakdown voltage between contacts and coil: 1,500 V • Capacity: 2 A • High sensitivity: 2 Form C; 140 mW power consumption (Single side stable type) SPECIFICATIONS Contact Arrangement 2 Form C Initial contact resistance, max. (By voltage drop 6 V DC 1 A) 75 mΩ Contact material Au-clad AgNi type Nominal switching capacity (resistive load) 2 A 30 V DC, 0.5 A 125 V AC Rating Max. switching power (resistive load) Max. switching voltage 60 W, 62.5 VA 220 V DC, 125 V AC Max. switching current 2A Min. switching capacity (Reference value)#1 10 µA 10 mV DC Nominal operating power Single side stable 1 coil latching 140 mW (1.5 to 12 V DC) 200 mW (24 V DC) 300 mW (48 V DC) 70 mW (1.5 to 12 V DC) 100 mW (24 V DC) 2 coil latching 140 mW (1.5 to 12 V DC) 200 mW (24 V DC) Mechanical (at 180 cpm) 108 Expected life (min. operations) Electrical (at 20 cpm) 2 A 30 V DC resistive 1 A 30 V DC resistive 105 2×105 0.5 A 125 V AC resistive 105 Note: #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level]) Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 2 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs *6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT . Characteristics Initial insulation resistance*1 Initial breakdown voltage Between open contacts Between contact sets Between contact and coil Initial surge voltage Between open contacts (10×160 µs) Between contacts and coil (2×10 µs) Temperature rise*2 (at 20°C) Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) Shock resistance Functional*5 Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight Ambient temperature Humidity Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 V (FCC Part 68) 2,500 V (Telcordia) Max. 50°C Max. 4 ms [Max. 4 ms] Max. 4 ms [Max. 4 ms] Min. 750 m/s2 {75 G} Min. 1,000 m/s2 {100 G} 200 m/s2 {20G}, 10 to 55 Hz at double amplitude of 3.3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +85°C*3 –40°F to +185°F 5 to 85% R.H. Approx. 2 g .071 oz All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. ORDERING INFORMATION Ex. TQ 2 SA – L – 3V – Z TQ SMD Contact arrangement Surface-mount availability Operating function Coil voltage (DC) Packing style 2: 2 Form C SA: Standard surface-mount SA: terminal type SL : High connection reliability SA: surface-mount terminal type SS: Space saving surfaceSA: mount terminal type Nil: Single side stable L: 1 coil latching L2: 2 coil latching 1.5, 3, 4.5, 5, 6, 9, 12, 24, 48* V Nil: Tube packing Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side) *48 V coil type: Single side stable only Notes: 1. Tape and reel (picked from 1/2/3/4/5-pin side) is also available by request. Part No. suffix “-X” is needed when ordering. (ex.) TQ2SA-3V-X 2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay. TYPES 1. Single side stable Part No. Nominal voltage, V DC TQ2S❍-1.5 V TQ2S❍-3 V TQ2S❍-4.5 V TQ2S❍-5 V TQ2S❍-6 V TQ2S❍-9 V TQ2S❍-12 V TQ2S❍-24 V TQ2S❍-48 V 1.5 3 4.5 5 6 9 12 24 48 Pick-up voltage, V DC (max.) 1.13 2.25 3.38 3.75 4.5 6.75 9 18 36 Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8 Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3 6.3 Coil resistance, Ω (±10%) Nominal operating power, mW Max. allowable voltage, V DC 16 64.3 145 178 257 579 1,028 2,880 7,680 140 140 140 140 140 140 140 200 300 2.2 4.5 6.7 7.5 9 13.5 18 36 57.6 2. 1 coil latching Part No. TQ2S❍-L-1.5 V TQ2S❍-L-3 V TQ2S❍-L-4.5 V TQ2S❍-L-5 V TQ2S❍-L-6 V TQ2S❍-L-9 V TQ2S❍-L-12 V TQ2S❍-L-24 V Nominal voltage, V DC 1.5 3 4.5 5 6 9 12 24 Set voltage, V DC (max.) 1.13 2.25 3.38 3.75 4.5 6.75 9 18 Reset voltage, V DC (max.) 1.13 .


TQ2SS-L2-5V TQ2SS-L2-6V TQ2SS-L2-9V


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)