DatasheetsPDF.com

B913 Dataheets PDF



Part Number B913
Manufacturers Sanyo
Logo Sanyo
Description 2SB913
Datasheet B913 DatasheetB913 Datasheet (PDF)

Ordering number:1034B PNP/NPN Epitaxial Planar Silicon Darlington Transistors 2SB913/2SD1230 Driver Applications Applications · Motor drivers, printer hammer drivers, relay drivers, voltage regulator control. Features · High DC current gain. · High current capacity and wide ASO. · Low saturation voltage. Package Dimensions unit:mm 2022A [2SB913/2SD1230] ( ) : 2SB913 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitte.

  B913   B913


Document
Ordering number:1034B PNP/NPN Epitaxial Planar Silicon Darlington Transistors 2SB913/2SD1230 Driver Applications Applications · Motor drivers, printer hammer drivers, relay drivers, voltage regulator control. Features · High DC current gain. · High current capacity and wide ASO. · Low saturation voltage. Package Dimensions unit:mm 2022A [2SB913/2SD1230] ( ) : 2SB913 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Symbol VCBO VCEO VEBO IC ICP PC Junction Temperature Storage Temperature Tj Tstg Tc=25˚C Conditions Electrical Characteristics at Ta = 25˚C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Symbol Conditions ICBO IEBO hFE fT VCE(sat) VCB=(–)80V, IE=0 VEB=(–)5V, IC=0 VCE=(–)3V, IC=(–)4A VCE=(–)5V, IC=(–)4A IC=(–)4A, IB=(–)8mA Base-to-Emitter Saturation Voltage VBE(sat) IC=(–)4A, IB=(–)8mA 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PB Ratings (–)110 (–)100 (–)6 (–)8 (–)12 2.5 60 150 –55 to +150 Unit V V V A A W W ˚C ˚C Ratings min typ 1500 4000 20 0.9 (–1.0) max (–)0.1 (–)3 (–)1.5 (–)2.0 Unit mA mA MHz V V V Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92098HA (KT)/10996TS (KOTO) 8-4521 4067KI/O193KI, TS No.1034–1/4 Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Turn-ON Time Storage Time Fall Time Switching Time Test Circuit 2SB913/2SD1230 Symbol Conditions V(BR)CBO V(BR)CEO ton IC=(–)5mA, IE=0 IC=(–)50mA, RBE=∞ See specified Test Circuit tstg See specified Test Circuit tf See specified Test Circuit Electrical Connection Ratings min typ (–)110 (–)100 (0.7) 0.6 (1.4) 4.8 (1.5) 1.6 max Unit V V µs µs µs µs µs µs No.1034–2/4 2SB913/2SD1230 No.1034–3/4 2SB913/2SD1230 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any and all SANYO products described or contained herein fall under strategic products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, such products must not be exported without obtaining export license from the Ministry of International Trade and Industry in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information her.


D1230 B913 D1224


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)