Data Sheet
Dual-Channel Isolators with Integrated DC-to-DC Converters ADuM5210/ADuM5211/ADuM5212
FEATURES
isoPower int...
Data Sheet
Dual-Channel Isolators with Integrated DC-to-DC Converters ADuM5210/ADuM5211/ADuM5212
FEATURES
isoPower integrated, isolated dc-to-dc converter Regulated 3.15 V to 5.25 V output Up to 150 mW output power Dual dc-to-100 Mbps (NRZ) signal isolation channels Soft start power supply 20-lead SSOP package with 5.3 mm creepage Supports SPI up to 15 MHz High temperature operation: 105°C High common-mode transient immunity: >25 kV/µs Safety and
regulatory approvals
UL recognition (pending) 2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A (pending) VDE certificate of conformity (pending)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 560 V peak
APPLICATIONS
RS-232 transceivers Power supply start-up bias and gate drives Isolated sensor interfaces Industrial PLCs
GENERAL DESCRIPTION
The ADuM5210/ADuM5211/ADuM52121 are dual-channel digital isolators with isoPower®, an integrated, isolated dc-to-dc converter. Based on the Analog Devices, Inc., iCoupler® technology, the dc-todc converter provides regulated, isolated power that is adjustable between 3.15 V and 5.25 V. Input supply voltages can range from slightly below the required output to significantly higher. Popular voltage combinations and their associated power levels are shown in Table 1.
The ADuM5210/ADuM5211/ADuM5212 eliminate the need for a separate, isolated dc-to-dc converter in low power, isolated designs. The iCoupler chip-scale transformer technology is used for isolated logic signals ...