DatasheetsPDF.com

AT24MAC602 Dataheets PDF



Part Number AT24MAC602
Manufacturers ATMEL Corporation
Logo ATMEL Corporation
Description 2-Kbit Serial EEPROM
Datasheet AT24MAC602 DatasheetAT24MAC602 Datasheet (PDF)

AT24MAC402 and AT24MAC602 I2C-Compatible (2-wire) 2-Kbit Serial EEPROM with a Factory-Programmed EUI-48™ or EUI-64™Address Plus an Embedded Unique 128-bit Serial Number 2-Kbit (256 x 8) Standard Serial EEPROM Features DATASHEET  Low-voltage Operation ̶ 1.7V Minimum (VCC = 1.7V to 5.5V)  Internally Organized as 256 x 8 (2K)  I2C-compatible (2-wire) Serial Interface  Schmitt Trigger, Filtered Inputs for Noise Suppression  Bi-directional Data Transfer Protocol  400kHz (1.7V) and 1MHz (2.5V.

  AT24MAC602   AT24MAC602


Document
AT24MAC402 and AT24MAC602 I2C-Compatible (2-wire) 2-Kbit Serial EEPROM with a Factory-Programmed EUI-48™ or EUI-64™Address Plus an Embedded Unique 128-bit Serial Number 2-Kbit (256 x 8) Standard Serial EEPROM Features DATASHEET  Low-voltage Operation ̶ 1.7V Minimum (VCC = 1.7V to 5.5V)  Internally Organized as 256 x 8 (2K)  I2C-compatible (2-wire) Serial Interface  Schmitt Trigger, Filtered Inputs for Noise Suppression  Bi-directional Data Transfer Protocol  400kHz (1.7V) and 1MHz (2.5V, 5.0V) Compatibility  Write Protect Pin for Hardware Data Protection of the Entire Array  Permanent and Reversible Software Write Protection for the First-half of the Array ̶ Software Procedure to Verify Write Protect Status  16-byte Page Write Modes ̶ Partial Page Writes Allowed  Self-timed Write Cycle (5ms max)  High-reliability ̶ Endurance: 1,000,000 Write Cycles ̶ Data Retention: 100 Years  Green Package Options (PB/Halide-free/RoHS Compliant) ̶ 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, and 5-lead SOT23  Die Sale Options: Wafer Form and Tape and Reel Enhanced Features in the MAC Serial EEPROM Family  Factory-programmed EUI-48 or EUI-64 Compatible Address ̶ Permanently Locked, Read-only Value ̶ Stored in a Separate Memory Area ̶ Guaranteed Unique EUI Address  Custom Programming Services Available ̶ Manage and Program Customer’s IEEE Assigned OUI  Unique Factory-programmed 128-bit Serial Number ̶ Unique for all Atmel® AT24CS, AT93CS, and AT25S Series Serial EEPROMs ̶ Permanently Locked, Read-only Value ̶ Stored in a Separate Memory Area Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015 1. Description The Atmel AT24MAC402 and AT24MAC602 provides 2048 bits of Serial Electrically-Erasable Programmable Read-Only Memory (EEPROM) organized as 256 words of eight bits each and is accessed via an I2C-compatible (2-wire) serial interface. In addition, AT24MAC402/602 incorporates an easy and inexpensive method to obtain a globally unique MAC or EUI address (EUI-48 or EUI-64). AT24MAC402 is an EUI-48 compatible device that contains a 48-bit EUI address, and AT24MAC602 is an EUI-64 compatible device that contains a 64-bit EUI address. The EUI-48 and EUI-64 addresses can be assigned as the actual physical address of a system hardware device or node or it can be assigned to a software instance. These addresses are factory programmed by Atmel and permanently write protected in an extended memory block located outside of the standard 2-Kbit bit memory array. In addition, the AT24MAC402/602 provides the value added feature of a factory-programmed, guaranteed unique 128-bit serial number located in the extended memory block (same area as the EUI address values). The serial number is Atmel factory-programmed and permanently write protected. This 128-bit serial number is compatible with all AT24CS, AT93CS, and AT25S family serial numbers, therefore, providing guaranteed unique serial numbers for any application that is also using Atmel Serial EEPROMs. The first-half of the AT24MAC402/602 incorporates a permanent and a reversible software write protection feature while a hardware write protect feature for the entire array is available via an external pin. The permanent software write protection is enabled by sending a special command to the device. This protection cannot be reversed once executed. However, the reversible software write protection can be reversed by sending and executing a special command. The hardware write protection is controlled by the WP pin state and can be used to protect the entire array regardless of whether or not the software write protection has been enabled. The software and hardware write protection features allow the user the flexibility to protect no portion of the memory, the first-half of the memory, or the entire memory array depending on the specific needs of the application. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. The AT24MAC402/602 is available in space saving 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, and 5-lead SOT23 packages. Both devices operate across a wide supply voltage range from 1.7V to 5.5V VCC. 2 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015 2. Pin Configurations and Pinouts Figure 1. Pin Configurations Pin Name A0 - A2 SDA SCL WP GND VCC Function Address Inputs Serial Data Serial Clock Input Write Protect Ground Power Supply 8-lead SOIC (Top View) A0 A1 A2 GND 1 2 3 4 8 VCC 7 WP 6 SCL 5 SDA A0 A1 A2 GND 8-lead TSSOP (Top View) 18 27 36 45 VCC WP SCL SDA 8-pad UDFN (Top View) A0 A1 A2 GND 1 2 3 4 8 VCC 7 WP 6 SCL 5 SDA 5-lead SOT23 (Top View) SCL GND SDA 15 2 34 WP VCC Notes: 1. For use of the 5-lead SOT23, the software A2, A1, and A0 bits in the device address word must be set to zero to properly communicate with the device since the A2, A1, and A0 pins are not bonded out. Some functionality is not possible due to thes.


AT24MAC402 AT24MAC602 SG489


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)