FNB40560B2

FNB40560 / FNB40560B2 FNB40560 / FNB40560B2 Motion SPM® 45 Series March 2015 Features UL Certified No. E209204 (UL1557) 600 V - 5 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection Low Thermal Resistance Using Ceramic Substrate Low-Loss, Short-Circuit Rated IGBTs Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout Built-In NTC Thermistor for Temperature Monitoring Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing Single-Grounded Power Supply Isolation Rating: 2000 Vrms / min. General Description FNB40560 / FNB40560B2 is a Motion SPM® 45 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring, and fault reporting. The built-in, highspeed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust short-circuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Applications Motion Control - Home Appliance / Industrial Motor Related Resources AN-9070 - Motion SPM® 45 Series Users Guide AN-9071 - Motion ...