Motion SPM 55 Series
FNA51060T3 Motion SPM® 55 Series
FNA51060T3
Motion SPM® 55 Series
September 2014
Features
• UL Certified No. E209204 ...
Description
FNA51060T3 Motion SPM® 55 Series
FNA51060T3
Motion SPM® 55 Series
September 2014
Features
UL Certified No. E209204 (UL1557)
600 V - 10 A 3-Phase IGBT Inverter Including Control IC for Gate Drive and Protections
Low-Loss, Short-Circuit Rated IGBTs
Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
Active-HIGH interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input
HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection
Fault Output for Under-Voltage and Short-Circuit Current Protection
Inter-Lock Function to Prevent Short-Circuit
Shut-Down Input
HVIC Temperature-Sensing Built-In for Temperature Monitoring
Optimized for 5 kHz Switching Frequency
Isolation Rating: 1500 Vrms / min.
General Description
FNA51060T3 is a Motion SPM 55 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, inter-lock function, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust shortcircuit-rated IGBTs. Separate negative IGBT terminals are avail...
Similar Datasheet