10V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH
ADVANCED INFORMATION
AP22850 10V SINGLE CHANNEL PROGRAMMABLE LOAD S0WITCH
Description
AP22850 is an integrated P-Chann...
Description
ADVANCED INFORMATION
AP22850 10V SINGLE CHANNEL PROGRAMMABLE LOAD S0WITCH
Description
AP22850 is an integrated P-Channel load switch, which features an adjustable ramp-up and discharge rate that can be set via an external capacitor and a resistor, respectively. In addition, it incorporates a “power good” output to flag when the switch is fully enhanced. The PChannel switch has a typical RDS(ON) of 21mΩ, enabling a current handling capability of up to 8A.
AP22850 is designed to operate from 4.5V to 11V. The near-zero quiescent supply current makes it ideal for use in battery powered distribution systems where power consumption is a concern.
Even as a P-Channel load switch, AP22850 does not require an external gate pull-up resistor, and consequently, stays true to its headlining feature of near-zero quiescent current specification. It also features circuitry to suppress fast input transients (with EN low) from coupling to VOUT.
Pin Assignments
Top View
Bottom View
SS 1 EN 2 VIN 3 VIN 4
VOUT
8 DIS
8
7 PG
7
6 VBIAS 6
5 GND 5
W-DFN2020-8
VOUT
1 SS 2 EN 3 VIN 4 VIN
Feature
Near-Zero Quiescent Current No External Gate Pull-Up Resistor Required Suppresses Fast Transients on VIN 4.5V to 11V Input Voltage Range Low Typical RDS(ON) of 21mΩ Adjustable Start-Up and Discharge Rate Small Form Factor Package W-DFN2020-8
– Footprint of just 4mm2 Thermally Efficient Package with an Exposed Pad Case Material: Molded Plastic, “Green” Molding Compound.
UL Flamma...
Similar Datasheet