Document
8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503
POWERMITE®
3.0 WATT Zener Diodes
1PMT5913B
thru
1PMT5956B
DESCRIPTION
® In Microsemi's Powermite surface mount package, these zener diodes
provide power-handling capabilities (3.0 WATTS) found in larger packages. ®
In addition to its size advantages, Powermite package features include a
full metallic bottom that eliminates the possibility of solder flux entrapment
during assembly, and a unique locking tab acts as an integral heat sink. Its innovative design makes this device ideal for use with automatic insertion equipment.
DO-216
FEATURES
• Surface Mount Packaging • Integral Heat Sink Locking Tabs • Compatible with automatic insertion equipment • Full metallic bottom eliminates flux entrapment • Zener voltage 3.3 to 200 Volts
• Low reverse leakage • Tight tolerance available • ESD Rating of >16kV per human body model
MAXIMUM RATINGS
• Junction and storage temperatures: -55°C to +150°C • DC power dissipation: 3.0 watt with TAB 1 60°C • Forward voltage:
@ 200 mA 1.2 volts
Mechanical Specifications
CIRCUIT DIAGRAM
MECHANICAL CHARACTERISTICS
• Cathode designated by TAB 1 • Mounting position any way • Molded package • Weight: 0.016 gram (approximate)
P•ackTahegrimnagl resistance 30°C/W junction to TAB1 •PACTaKpAe G& IRNeGel EIA Standard 481
• Tape & Reel EIA Standard 481 • 7 inch 3,000 pieces • 13 inch 12,000 pieces
Mounting Pad Dimensions
All dimensions +/- .005 inches
MSC0995.PDF
ISO 9001 CERTIFIED
Inches
REV F 11/01/99
Electrical Characteristics @ TL = 30°°C
MICROSEMI NUMBER
DEVICE MARKING
ZENER
VOLTAGE (1) VZ
TEST CURRENT
IZT
DYNAMIC
IMPEDANCE (2) ZZT
1PMT5913B 1PMT5914B 1PMT5915B 1PMT5916B 1PMT5917B 1PMT5918B 1PMT5919B 1PMT5920B 1PMT5921B 1PMT5922B 1PMT5923B 1PMT5924B 1PMT5925B 1PMT5926B 1PMT5927B 1PMT5928B 1PMT5929B 1PMT5930B 1PMT5931B 1PMT5932B 1PMT5933B 1PMT5934B 1PMT5935B 1PMT5936B 1PMT5937B 1PMT5938B 1PMT5939B 1PMT5940B 1PMT5941B 1PMT5942B 1PMT5943B 1PMT5944B 1PMT5945B 1PMT5946B 1PMT5947B 1PMT5948B 1PMT5949B 1PMT5950B 1PMT5951B 1PMT5952B 1PMT5953B 1PMT5954B 1PMT5955B 1PMT5956B
VOLTS
913 3.3 914 3.6 915 3.9 916 4.3 917 4.7 918 5.1 919 5.6 920 6.2 921 6.8 922 7.5 923 8.2 924 9.1 925 10 926 11 927 12 928 13 929 15 930 16 931 18 932 20 933 22 934 24 935 27 936 30 937 33 938 36 939 39 940 43 941 47 942 51 943 56 944 62 945 68 946 75 947 82 948 91 949 100 950 110 951 120 952 130 953 150 954 160 955 180 956 200
mA
113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1
50 45.7 41.2 37.5 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 6.7 6.0 5.5 5.0 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9
OHMS
10 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10 12 14 17.5 19 23 28 33 38 45 53 67 70 86 100 120 140 160 200 250 300 380 450 600 700 900 1200
KNEE CURRENT
IZK
mA
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
KNEE IMPEDANCE
ZZK
OHMS
500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000
1PMT5913B thru 1PMT5956B
REVERSE CURRENT
IR (MAX)
µ Adc
100 75 25 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
REVERSE VOLTAGE
VR
VOLTS
1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.2 56 62.2 69.2 76 83.6 91.2 98.8 114 121.6 136.8 152
MAX ZENER CURRENT
(3) IZM
mA
749.1 686.4 633.6 547.2 526.4 481.8 432.3 397.7 363.0 330.0 300.3 270.6 247.5 224.4 206.2 189.8 165.0 153.5 68.5 123.8 112.2 102.3 90.8 82.5 74.3 67.7 62.7 56.1 51.2 47.9 42.9 38.6 36.3 33.0 29.7 26.4 24.8 21.5 19.8 18.1 16.5 14.9 13.2 11.6
NOTE 1: Product shown has a standard tolerance of ±5% on the nominal zener voltage. Also available in 2% and 1% tolerance with suffix C and D respectively. VZ is measured at IZT with Tc (TAB 1) 30°C . Voltage measurement to be performed 20 seconds after application of dc current.
NOTE 2: Zener impedance is derived by superimposing on IZT a 60Hz rms ac current equal to 10% of IZT. NOTE 3: Based upon 3 W maximum power dissipation. Allowance has been made for the higher voltage associated with
operation at higher currents and temperature. For determination of voltage change with current deviations from IZT see Micro Note 202.
MSC0995.PDF
ISO 9001 CERTIFIED
REV F 11/01/99
.