Silicone Rubber Compounds
RTV31, RTV60, RTV88
Technical Data Sheet
Silicone Rubber Compounds for High Temperature
Product Description
RTV31, R...
Description
RTV31, RTV60, RTV88
Technical Data Sheet
Silicone Rubber Compounds for High Temperature
Product Description
RTV31, RTV60 and RTV88 silicone rubber compounds are high temperature two-part silicone elastomers. They are supplied ready-to-use with a base compound and DBT (dibutyl tin dilaurate) as the standard curing agent. DBT is suitable for most applications, however other catalysts are available to facilitate deep section cure, faster cure and automated mixing. RTV31, RTV60 and RTV88 silicone rubber compounds differ primarily in viscosity in the uncured state.
Key Performance Properties
Variable work times and cure rates by adjusting the amount and type of curing agent
Room temperature cure Composition free of solvents and solvent odour Excellent adhesion capabilities with primer Excellent release properties Retention of elastomeric properties at temperatures from -54°C
up to 260°C continuously, and up to 316°C for short periods of time
Applications
Typical high temperature applications for these products include, but are not limited to:
Potting and encapsulating electric motors and transformers Fabrication of rubber parts Casting moulds for low-melting point metals Release applications such as rubber rollers Thermal insulation
Typical Product Data
UNCURED PROPERTIES OF RTV BASE COMPOUNDS Colour
Consistency
Viscosity, mPa-s
RTV31 Red
Pourable 25,000
RTV60 Red
Pourable 47,000
RTV88
Red Spreadable
Paste 880,000
Specific Gravity, g/cm³ UNC...
Similar Datasheet