Single-Stage Flyback and Boundary-Mode PFC Controller
FL7930C — Single-Stage Flyback and Boundary-Mode PFC Controller for Lighting
October 2013
FL7930C Single-Stage Flyback...
Description
FL7930C — Single-Stage Flyback and Boundary-Mode PFC Controller for Lighting
October 2013
FL7930C Single-Stage Flyback and Boundary-Mode PFC Controller for Lighting
Features
PFC-Ready Signal VIN-Absent Detection Maximum Switching Frequency Limitation Internal Soft-Start and Startup without Overshoot Internal Total Harmonic Distortion (THD) Optimizer Precise Adjustable Output Over-Voltage Protection Open-Feedback Protection and Disable Function Zero-Current Detector (ZCD) 150 μs Internal Startup Timer MOSFET Over-Current Protection (OCP) Under-Voltage Lockout with 3.5 V Hysteresis Low Startup and Operating Current Totem-Pole Output with High State Clamp +500/-800 mA Peak Gate Drive Current 8-Pin, Small Outline Package (SOP)
Applications
Ballast General LED Lighting Industrial, Commercial, and Residential Fixtures Outdoor Lighting: Street, Roadway, Parking,
Construction, Ornamental LED Lighting Fixtures
Description
The FL7930C is an active power factor correction (PFC) controller for boost PFC applications that operate in critical conduction mode (CRM). It uses a voltage-mode PWM that compares an internal ramp signal with the error amplifier output to generate a MOSFET turn-off signal. Because the voltage-mode CRM PFC controller does not need rectified AC line voltage information, it saves the power loss of an input voltage-sensing network necessary for a current-mode CRM PFC controller.
FL7930C provides over-voltage protection (OVP), o...
Similar Datasheet