Document
RoHS compliant
1A TMHRU 1A7 BRF1035 thru MBRF10200
®
Isolated 10.0 AMPS. Schottky Barrier Rectifiers
Features
Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: JEDEC ITO-220AC molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams
ITO-220AC
.406(10.3) .381(9.7) .134(3.4) .118(3.0)
.112(2.85) .100(2.55)
.055(1.4) .039(1.0)
.055(1.4) .039(1.0) .035(0.9) .011(0.3)
.1 (2.55)
.1 (2.55)
.161(4.1)MAX .543(13.8) .512(13.0)
.272(6.9) .248(6.3)
.606(15.4) .583(14.8)
Unit : inch (mm)
.189(4.8) .165(4.2) .130(3.3) .114(2.9)
.114(2.9) .098(2.5) .032(.8) MAX
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc=125oC Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at Tc=125oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1)
Symbol VRRM VRMS VDC I(AV) IFRM
IFSM IRRM
MBR 1035
35 24 35
MBR 1045
45 31 45
MBR 1060
60 42 60
MBR 1090
90 63 90 10
32
150
MBR 10100
100 70 100
MBR 10150
150 105 150
MBR 1022 00
Units
200 V
140 V
200 V
A
A
A
1.0 0.5 A
Maximum Instantaneous Forward Voltage at:
(Note 2)
IF=10A, TC=25oC
IF=10A, TC=125oC IF=20A, TC=25oC IF=20A, TC=125oC
VF
0.70 0.57
0.84
0.72
0.80 0.70 0.95 0.85.
0.85
0.95
0.71 - V
--
--
Maximum Instantaneous Reverse Current @ Tc =25 oC at Rated DC Blocking Voltage @ Tc=125 oC (Note 2)
IR 0.1
15 10
0.1 mA 6.0 mA
Voltage Rate of Change (Rated VR)
Typical Junction Capacitance
Maximum Typical Thermal Resistance(Note 3) Operating Junction Temperature Range
Storage Temperature Range
dV/dt
Cj
RθJC
TJ
TSTG
10,000 500 3.0
-65 to +150
-65 to +175
V/uS pF
oC/W oC
oC
Notes: 1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg with Heatsink Size of 2 in x 3 in x 0.25 in Al-Plate.
MAR-14,2006,REV.3
CUMSUMI SEMICONDUCTOR INTERNATIONAL ® www.cumsumi.com
1/2
1A TMHRU 1A7 BRF1035 thru MBRF10200
®
AVERAGE FORWARD CURRENT. (A)
INSTANTANEOUS FORWARD CURRENT. (A)
RATINGS AND CHARACTERISTIC CURVES (MBRF1035 THRU MBRF10200)
FIG.1- FO.